RJ-441104-101 - JL/JT Ram Assist Steering Axle Bracket (Low Steer)

The RockJock Ram Assist Steering Axle Bracket for all JL Wrangler, JL Unlimited and JT Gladiator vehicles equipped with factory differentials and low-steer knuckles provides a simple, bolt-on solution for anchoring the axle housing side of your ram assist steering ram.
Installing ram assist steering and getting the geometry correct the first time has never been viewed as an easy thing until now! Our bracket systems genuinely do make bolting a ram onto your vehicle just that – bolt-on and forget it!
Semi-gloss black powder coated 3/16 in. steel bracket includes all mounting hardware. See attached diagram for fitment.

Kit Fits:

• JL Wrangler Unlimited (4-door) – All Models (with any stock front axle and low-steer knuckles)
• JL Wrangler (2-door) – All Models (with any stock front axle and low-steer knuckles)
• JT Gladiator – All Models (with any stock front axle and low-steer knuckles)

Kit Includes:

• (1) Ram Assist Steering Axle Bracket
• All required hardware

Note:

• For use with factory differentials only!
• For use in low steer applications only! For high-steer application see RJ-441109-103.
• Intended for use with a 6.75 in. stroke ram.
• See diagram for fitment here.

Parts List:

• Steel Axle Bracket: RJ-441104-1
• Steel Washer Plate: RJ-441104-5
• 5/8 in.-18 x 1 3/4 in. Long Hex Bolt: RJ-501210-3
• 5/8 in. Flat Washer: CE-98023A035
• 14mm-1.50 x 80mm Long Hex Bolt: RJ-501102-1
• 12mm-1.75 x 75mm Long Hex Bolt: RJ-501100-1
• 12mm Flat Washer: CE-91455A150
• 12mm-1.75 Stover Nut: RJ-502104-1
• 10mm-1.5 x 30mm Flanged Hex Bolt CE-98093A624
• 10mm-1.5 Flanged Stover Nut: RJ-502105-1
• 3/8 in. Flat Washer: RJ-90108A415