Hammer Front Bumper Skid Plate for Jeep JK / JKU

The Hammer Skid plate is an add-on option to The Hammer Jeep JK Front Bumper. Skid plate is laser cut from 3/16 inch P and O steel and formed on a press brake. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bar. If you remove the skid plate later, the part that you've trimmed will not be seen. Skid plate bolts on to The Hammer front bumper and requires no welding.

Important Information

• The skid plate is the bottom piece shown with three holes. Bumper and skid plate sold separately
• Crash bar cross member may need trimming on edges for the skid plate to mount flush.

Compatible With:

JK, JKU