CE-9807RBLBK - JK Rear Brake Hose Relocation Bracket Kit

RockJock's Rear Brake Hose Relocation Bracket Kit allows you to simply relocate your stock brake hoses on your JK Wrangler or Unlimited when a lift is installed. When you lift your JK, the stock brake hose length immediately becomes too short to accommodate the new lift, obviously causing a serious safety hazard! These brackets allow you to simply unbolt the stock brake hoses from the frame, bolt this bracket to the frame with the stock bolts, relocate the hoses to the new holes on the brackets and attach the hoses to the brackets with the new, supplied hardware. No expensive new hoses, no need to bleed your brakes!
Finish is semi-gloss black powder coat on the brackets and clear zinc plating on the hardware.

Kit Fits:

• JK Wrangler Unlimited (4-door) – All Models
• JK Wrangler (2-door) – All Models

Kit Includes:

• (2)  Rear Brake Hose Relocation Brackets
• All required hardware

Lift Range:

• For use with up to 4 in. of suspension lift.

Notes:

• IMPORTANT: these brackets were designed to be used with the lift and travel amounts provided by our (RockJock’s) suspension kit! If you are using this kit with anything other than a RockJock suspension kit, you must cycle your suspension before use to ensure that these brackets are sufficient in protecting your brake lines from being ripped off in your specific application!

Parts List:

• Rear Brake Hose Relocation Bracket (fits either side):  CE-9807RBLB
• 1/4 in.-20 x 1/2 in. Hex Head Screws:  CE-92965A537
• 1/4 in. Flat Washers:  CE-91950A029