CE-9142 - TJ/LJ Rear Sway Bar Extended Links

RockJock's Extended Rear Sway Bar Links for lifted TJ Wrangler and Unlimited (LJ) vehicles allow you to reuse your stock rear sway bar after your vehicle is lifted 3 1/2 in. to 4 1/2 in.
These new longer links directly replace the stock links with longer heavy duty fabricated steel links that feature urethane bushings with steel inner sleeves.

Kit Fits:

• TJ Wrangler – All Models w/ 3 1/2 in. to 4 1/2 in. of lift
• TJ Wrangler Unlimited (LJ) – All Models w/ 3 1/2 in. to 4 1/2 in. of lift

Kit Includes:

• TJ/LJ Extended Rear Sway Bar Links (pair)

Component Specs.:

• Fabricated from 1/2 in. Steel Rod
• 9 3/4 in. long C-C (4 in. longer than the stock links)
• Urethane Bushings on both ends
• Steel inner bushing sleeves
• Thru-holes at ends are .562 in. (9/16 in.) - see notes
• Finished in clear zinc plating

Notes:

• Mandatory component when you are retaining you factory rear sway bar on a lifted vehicle!
• Intended for use with the factory sway bar. May be compatible with aftermarket sway bars, but we have no experience with testing this.
• Fits lifted vehicles only (see above).
• Factory hardware is retained to attach links to the sway bar and the chassis in applications that featured the 14mm (or 9/16 in.) dia. hardware (some year models featured smaller hardware which would have to be replaced to use these links)