{"title":"Johnny Joint Axle Kits","description":"","products":[{"product_id":"ce-9102k-tj-lj-xj-mj-zj-front-axle-housing-johnny-joint-kit-7-16-in-bolts","title":"CE-9102K - TJ\/LJ\/XJ\/MJ\/ZJ Front Axle Housing Johnny Joint Kit (7\/16 in. Bolts)","description":"\u003cp\u003e\u003cb\u003eRockJock's Johnny Joint Differential Housing Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ereplaces the rubber front differential housing upper control arm bushings on your TJ, LJ, XJ, MJ or ZJ vehicle with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThis kit includes a machined Johnny Joint insert for the driver’s side of the differential, a weld-in (see\u003cspan\u003e \u003c\/span\u003einstructions) tombstone bracket, equipped with a Johnny Joint, that installs on the passenger’s side of the differential, 7\/16 greasable bolts for both Joints and an installation tool.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is clear zinc plating on the insert style Johnny Joint and raw, weldable steel on the tombstone bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTJ Wrangler – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Machined 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(1)  Laser cut tombstone bracket w\/ 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003cli\u003e(1)  Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eThis kit includes 7\/16 in. bolts. Stock upper control arm bolts are 10mm. It is uncommon, but possible, depending on what upper control arms your vehicle is equipped with, that you may have to ream your control arm bolt holes out to 7\/16 in. with the proper drill bit.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:\u003cspan\u003e \u003c\/span\u003eCE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102KB2\u003c\/li\u003e\n\u003cli\u003eComplete (single) Machined Johnny Joint w\/ Greasable Bolt:  CE-9112M\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91127\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-91127Z\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for driver’s side joint:  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267796271182,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102K_webstoreimage.avif?v=1766871503"},{"product_id":"ce-9102k1-tj-lj-xj-mj-zj-front-axle-housing-johnny-joint-kit-1-2-in-bolts","title":"CE-9102K1 - TJ\/LJ\/XJ\/MJ\/ZJ Front Axle Housing Johnny Joint Kit (1\/2 in. Bolts)","description":"\u003cp\u003eRockJock's Johnny Joint Differential Housing Kit replaces the rubber front differential housing upper control arm bushings on your TJ, LJ, XJ, MJ or ZJ vehicle with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThe 1\/2 in. bolt option of this kit is generally used in racing applications, or, if you are just wanting to go as heavy as you can on everything from the get go.\u003cbr\u003eThis kit includes a machined Johnny Joint insert for the driver’s side of the differential, a weld-in (see\u003cspan\u003e \u003c\/span\u003einstructions) tombstone bracket, equipped with a Johnny Joint, that installs on the passenger’s side of the differential, 1\/2 in. greasable bolts for both Joints and an installation tool.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is clear zinc plating on the insert style Johnny Joint and raw, weldable steel on the tombstone bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTJ Wrangler – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Machined 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(1)  Laser cut tombstone bracket w\/ 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003cli\u003e(1)  Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eDrilling required! This kit includes 1\/2 in. bolts. Stock upper control arm bolts are 10mm. It is required for installation that you drill the bolt holes in your control arms out to 1\/2 in. with the proper drill bit.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:  CE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102KB2\u003c\/li\u003e\n\u003cli\u003eComplete (single) Machined Johnny Joint w\/ Greasable Bolt:  CE-9112M2\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91128\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-1103K21\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for driver’s side joint:  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267796566094,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102K1_webstoreimage.avif?v=1766871588"},{"product_id":"ce-9102k2-tj-lj-xj-mj-zj-2wd-front-beam-housing-johnny-joint-kit-7-16-in-bolts","title":"CE-9102K2 - TJ\/LJ\/XJ\/MJ\/ZJ 2WD Front Beam Housing Johnny Joint Kit (7\/16 in. Bolts)","description":"\u003cp\u003eRockJock's 2WD Front Beam Housing Johnny Joint Kit replaces the rubber front differential housing upper control arm bushings on your TJ, LJ, XJ, MJ or ZJ vehicle’s front beam with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThis kit includes 2 of our tombstone style Johnny Joint assemblies, which are laser cut, 1 in. thick steel weld-in bracket assemblies that install into the factory upper control arm brackets on your beam after cut the tops of the factory brackets off (see\u003cspan\u003e \u003c\/span\u003eCE-9102K\u003cspan\u003e \u003c\/span\u003einstructions for reference). 7\/16 in. greasable bolts are included for both Joints.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is raw, weldable steel.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTJ Wrangler – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2)  Laser cut tombstone brackets w\/ 2 in. Johnny Joints\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eThis kit includes 7\/16 in. bolts. Stock upper control arm bolts are 10mm. It is uncommon, but possible, depending on what upper control arms your vehicle is equipped with, that you may have to ream your control arm bolt holes out to 7\/16 in. with the proper drill bit.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:  CE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete (single) tombstone bracket with Johnny Joint installed and 7\/16 in. Greasable Bolt:  CE-9102KBA\u003c\/li\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102KB2\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91127\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-91127Z\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267798630478,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102K2_webstoreimage.jpg?v=1766871848"},{"product_id":"ce-9102k2b-tj-lj-xj-mj-zj-2wd-front-beam-housing-johnny-joint-kit-1-2-in-bolts","title":"CE-9102K2B - TJ\/LJ\/XJ\/MJ\/ZJ 2WD Front Beam Housing Johnny Joint Kit (1\/2 in. Bolts)","description":"\u003cp\u003eRockJock's 2WD Front Beam Housing Johnny Joint Kit replaces the rubber front differential housing upper control arm bushings on your TJ, LJ, XJ, MJ or ZJ vehicle’s front beam with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThe 1\/2 in. bolt option of this kit is generally used in racing applications, or, if you are just wanting to go as heavy as you can on everything from the get go.\u003cbr\u003eThis kit includes 2 of our tombstone style Johnny Joint assemblies, which are laser cut, 1 in. thick steel weld-in bracket assemblies that install into the factory upper control arm brackets on your beam after cut the tops of the factory brackets off (see\u003cspan\u003e \u003c\/span\u003eCE-9102K\u003cspan\u003e \u003c\/span\u003einstructions for reference). 1\/2 in. greasable bolts are included for both Joints.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is raw, weldable steel.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTJ Wrangler – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – All Models’ Factory 2WD Beam Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2)  Laser cut tombstone brackets w\/ 2 in. Johnny Joints\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eDrilling required! This kit includes 1\/2 in. bolts. Stock upper control arm bolts are 10mm. It is required for installation that you drill the bolt holes in your control arms out to 1\/2 in. with the proper drill bit.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:  CE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete (single) tombstone bracket with Johnny Joint installed and 1\/2 in. Greasable Bolt:  CE-9102KBB\u003c\/li\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102KB2\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91128\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-1103K21\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267798958158,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102K2B_webstoreimage.jpg?v=1766871926"},{"product_id":"ce-9112m-johnny-joint-2-in-machined-rod-end-axle-housing-kits-2-in-x-438-in-ball","title":"CE-9112M - Johnny Joint 2 in. Machined Rod End (Axle Housing Kits, 2 in x .438 in. Ball)","description":"\u003cp\u003e\u003cb\u003eRockJock's Johnny Joint Rod Ends\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ehave been a staple in the off road industry since 1996! Available universally for builders or found in our RockJock suspension components, John Currie’s proven formula provides a reliable, greasable, rebuildable joint that is capable of dramatic articulation in off-road applications, while still providing smooth, cushioned, quiet performance during on-road use.\u003cbr\u003eJohnny Joints are available as a forged rod end with various RH and LH thread sizes from 3\/4 in. up to a massive 1 1\/2 in. thread! Additionally, weld-on versions of all Johnny Joints are available for fabricators.\u003cbr\u003eSpecialty joints, such as polished stainless steel, long body and bent forgings and application specific machined joints are all available for custom builder use.\u003cbr\u003eAll sizes of joints offer a standard or a narrow width joint body which provide different levels of overall articulation range (up to 30 plus degrees on a standard body and up to 40 plus degrees on a narrow body). The narrow body’s 1 piece bushing will provide a slightly firmer ride.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThis 2 in. Johnny Joint\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eincorporates our machined, press-in, standard width, steel outer barrel and a 2 in. overall width x .438 in. thru-bolt hole pivot ball.\u003cbr\u003eThe machining to the outer barrel allows it to be pressed in to the front differential casting on TJ\/LJ\/XJ\/MJ\/ZJ vehicles to replace the factory rubber bushing.\u003cbr\u003eGreasing is handled internally via the included\u003cspan\u003e \u003c\/span\u003eCE-91127\u003cspan\u003e \u003c\/span\u003egreasable bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Fits:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Application\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Press-In Johnny Joint Assembly\u003c\/li\u003e\n\u003cli\u003e(1)  Greasable Bolt w\/ Hardware)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Features:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e32 degrees\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eof articulation capability\u003c\/li\u003e\n\u003cli\u003eCNC machined steel construction\u003c\/li\u003e\n\u003cli\u003e1.795 in. O.D. x 1.500 in. wide barrel dimensions\u003c\/li\u003e\n\u003cli\u003eMachined edge lip (acts as a stop when pressing in)\u003c\/li\u003e\n\u003cli\u003e2-piece bushing\u003cspan\u003e \u003c\/span\u003einternals\u003c\/li\u003e\n\u003cli\u003e2 in. wide x .438 in. thru-hole\u003cspan\u003e \u003c\/span\u003epivot ball\u003c\/li\u003e\n\u003cli\u003e7\/16 in.-20 x 3 1\/4 in. long\u003cspan\u003e \u003c\/span\u003egreasable bolt\u003cspan\u003e \u003c\/span\u003efor greasing\u003c\/li\u003e\n\u003cli\u003eShips assembled, ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use to replace the factory front upper control arm bushing on the driver's side of factory Dana 30 or 44 axle housings\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eONLY\u003c\/b\u003e!\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eNOT\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor use on the passenger's side! For the passenger's side, see\u003cspan\u003e \u003c\/span\u003eCE-9102K.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable installation tool for this rod end:  CE-9102KT\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint assembly\/disassembly tool for this rod end:  CE-9112T\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e*** IMPORTANT ***\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- joints require greasing at normal intervals, but they do not hold a lot of grease! Over greasing can cause damage to the joint. To prevent damage, use only a hand pump grease gun, do not expect the joint to take a lot of grease and\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDO NOT\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003euse pneumatic or electric grease guns!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress-In Steel Outer Barrel:  CE-9112MSB\u003c\/li\u003e\n\u003cli\u003eInternal Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003ePivot Ball:  CE-91122\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt (w\/ hardware):  CE-91127\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for this rod end (not included):  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267800432718,"sku":null,"price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9112M_webstoreimage-1.avif?v=1766872008"},{"product_id":"ce-9112m2-johnny-joint-2-in-machined-rod-end-axle-housing-kits-2-in-x-515-in-ball","title":"CE-9112M2 - Johnny Joint 2 in. Machined Rod End (Axle Housing Kits, 2 in x .515 in. Ball)","description":"\u003cp\u003e\u003cb\u003eRockJock's Johnny Joint Rod Ends\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ehave been a staple in the off road industry since 1996! Available universally for builders or found in our RockJock suspension components, John Currie’s proven formula provides a reliable, greasable, rebuildable joint that is capable of dramatic articulation in off-road applications, while still providing smooth, cushioned, quiet performance during on-road use.\u003cbr\u003eJohnny Joints are available as a forged rod end with various RH and LH thread sizes from 3\/4 in. up to a massive 1 1\/2 in. thread! Additionally, weld-on versions of all Johnny Joints are available for fabricators.\u003cbr\u003eSpecialty joints, such as polished stainless steel, long body and bent forgings and application specific machined joints are all available for custom builder use.\u003cbr\u003eAll sizes of joints offer a standard or a narrow width joint body which provide different levels of overall articulation range (up to 30 plus degrees on a standard body and up to 40 plus degrees on a narrow body). The narrow body’s 1 piece bushing will provide a slightly firmer ride.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThis 2 in. Johnny Joint\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eincorporates our machined, press-in, standard width, steel outer barrel and a 2 in. overall width x .515 in. thru-bolt hole pivot ball.\u003cbr\u003eThe machining to the outer barrel allows it to be pressed in to the front differential casting on JK\/TJ\/LJ\/XJ\/MJ\/ZJ vehicles to replace the factory rubber bushing.\u003cbr\u003eGreasing is handled internally via the included\u003cspan\u003e \u003c\/span\u003eCE-91128\u003cspan\u003e \u003c\/span\u003egreasable bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Fits:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Application\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eTJ Wrangler Unlimited (LJ) – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eXJ Cherokee – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eMJ Comanche – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003cli\u003eZJ Grand Cherokee – LF upper control arm bushing location on factory axle housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Includes:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Press-In Johnny Joint Assembly\u003c\/li\u003e\n\u003cli\u003e(1)  Greasable Bolt w\/ Hardware)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRod End Features:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e29 degrees\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eof articulation capability\u003c\/li\u003e\n\u003cli\u003eCNC machined steel construction\u003c\/li\u003e\n\u003cli\u003e1.795 in. O.D. x 1.500 in. wide barrel dimensions\u003c\/li\u003e\n\u003cli\u003eMachined edge lip (acts as a stop when pressing in)\u003c\/li\u003e\n\u003cli\u003e2-piece bushing\u003cspan\u003e \u003c\/span\u003einternals\u003c\/li\u003e\n\u003cli\u003e2 in. wide x .500 in. thru-hole\u003cspan\u003e \u003c\/span\u003epivot ball\u003c\/li\u003e\n\u003cli\u003e1\/2 in.-20 x 3 1\/2 in. long\u003cspan\u003e \u003c\/span\u003egreasable bolt\u003cspan\u003e \u003c\/span\u003efor greasing\u003c\/li\u003e\n\u003cli\u003eShips assembled, ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use to replace the factory front upper control arm bushing on the driver's side of factory Dana 30 or 44 axle housings\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eONLY\u003c\/b\u003e!\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eNOT\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor use on the passenger's side! For the passenger's side, see\u003cspan\u003e \u003c\/span\u003eCE-9102K1\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eCE-9102JK.\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable installation tool for this rod end:  CE-9102KT\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint assembly\/disassembly tool for this rod end:  CE-9112T\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e*** IMPORTANT ***\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- joints require greasing at normal intervals, but they do not hold a lot of grease! Over greasing can cause damage to the joint. To prevent damage, use only a hand pump grease gun, do not expect the joint to take a lot of grease and\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eDO NOT\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003euse pneumatic or electric grease guns!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress-In Steel Outer Barrel:  CE-9112MSB\u003c\/li\u003e\n\u003cli\u003eInternal Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003ePivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt (w\/ hardware):  CE-91128\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for this rod end (not included):  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43267803775054,"sku":null,"price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9112M2_webstoreimage-1.avif?v=1766872074"},{"product_id":"rj-301000-103-front-axle-housing-johnny-joint-kit-replaces-jl-jt-jk-bushing","title":"RJ-301000-103 - Front Axle Housing Johnny Joint Kit (replaces JL\/JT\/JK bushing)","description":"\u003cp\u003e\u003cb\u003eRockJock’s Johnny Joint Front Axle Housing Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ereplaces the front differential housing upper control arm bushings on your JL Wrangler, JL Unlimited or JT Gladiator with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension!\u003cbr\u003eThis kit includes Johnny Joint inserts that replace the rubber bushings on the axle housing, greasable bolts and installation tool.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable and are finished in clear zinc plating\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJL Wrangler Unlimited (4-door) – All Models’ Factory Front Axle\u003c\/li\u003e\n\u003cli\u003eJL Wrangler (2-door) – All Models’ Factory Front Axle\u003c\/li\u003e\n\u003cli\u003eJT Gladiator – All Models’ Factory Front Axle\u003c\/li\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) – All Models’ Aftermarket Front Axle\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) – All Models’ Aftermarket Front Axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2)  Custom Machined 2 in. Johnny Joints\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolts w\/ Hardware\u003c\/li\u003e\n\u003cli\u003e(1)  2-Piece Removal\/Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese Joints install into any and all JL\/JT factory front axle offerings using the supplied tool\u003c\/li\u003e\n\u003cli\u003eThe supplied tool is also used to uninstall the stock bushings\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:\u003cspan\u003e \u003c\/span\u003eCE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete (single) Johnny Joint w\/ Greasable Bolt:  RJ-301000-101\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112NRK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91128\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-1103K21\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for these joints:  RJ-530000-1\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003eRJ-530000-3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43270665109582,"sku":null,"price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/RJ-301000-103_webstoreimage-1.avif?v=1767053726"},{"product_id":"ce-9102jk-jk-front-axle-housing-johnny-joint-kit","title":"CE-9102JK - JK Front Axle Housing Johnny Joint Kit","description":"\u003cp\u003e\u003cb\u003eRockJock's Johnny Joint Differential Housing Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ereplaces the rubber front differential housing upper control arm bushings on your JK Wrangler and Unlimited or WJ Grand Cherokee with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThis kit includes a machined Johnny Joint insert for the driver’s side of the differential, a weld-in (see\u003cspan\u003e \u003c\/span\u003einstructions) tombstone bracket, equipped with a Johnny Joint, that installs on the passenger’s side of the differential, greasable bolts for both Joints and an installation tool.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is clear zinc plating on the insert style Johnny Joint and raw, weldable steel on the tombstone bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eWJ Grand Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Machined 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(1)   Laser cut tombstone bracket w\/ 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003cli\u003e(1)  Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:  CE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102JK1\u003c\/li\u003e\n\u003cli\u003eComplete (single) Machined Johnny Joint w\/ Greasable Bolt:  CE-9112M2\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91128\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-1103K21\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for driver’s side joint:  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43285944664142,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102JK_webstoreimage.avif?v=1767563688"}],"url":"https:\/\/www.precisionautooffroad.com\/collections\/johnny-joint-axle-kits.oembed","provider":"Precision Auto \u0026 Offroad","version":"1.0","type":"link"}