{"title":"Jeep JK 2007-2018","description":"","products":[{"product_id":"jl-jt-pritchett-canyon-front-bumper-welders-kit-1","title":"JK Pritchett Canyon Front Bumper Welders Kit","description":"\u003cul\u003e\n\u003cli\u003eA great DIY welding project\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eLaser Cut and CNC bent here in North Carolina.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe same proven designs we have sold and ran for years, now offered in an affordable ready to weld option.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eD-ring mounts are 1\/2\" thick  and 3\/4\" D-ring compatible.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eMain body is bent and dimpled here in house, unlike most other options on the market that require the customer to bend a relief cut and then weld a long seam. This helps with the excessive warping and blending in traditional DIY bumper kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003eFitment:\u003c\/div\u003e\n\u003cp\u003e2007-2018 Jeep JK Wrangler\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/B4WK12881_JK_JL_JT_Front_PC.pdf?v=1711551764\"\u003eWelding Instructions \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_Wrangler_JL_Tube_Front_Bumper_Installation_Instructions.pdf?v=1652363133\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_95ddc4d1-ac2e-4c44-ba9f-b390e5507c87.jpg?v=1708971912\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43229407543374,"sku":null,"price":377.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/B4WK12881JK.webp?v=1772133453"},{"product_id":"jeep-wrangler-jk-2007-2018-pritchett-canyon-crash-bar-skid","title":"Jeep Wrangler JK 2007-2018 Pritchett Canyon Crash Bar Skid","description":"\u003cdiv\u003eIf you have a JK and don't want to remove your crash bar, this will not only help protect your crash bar, but complete the look of your bumper as well. Formed out of 3\/16\" steel, this skid will withstand any hit that you can throw at it. If you have a Rubicon this skid will help protect the electronic sway bar disconnect motor. This skid will only work with our pritchett canyon series bumpers, but it is not compatible with the frame chop pritchett canyon of the bumper.  All installation hardware is included, painting or powder coating is required.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_Wrangler_JK_and_JKU_2007_Pritchett_Canyon_Crash_Bar_Skid_Installation_Instructions.pdf?v=1652362885\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43229410885710,"sku":null,"price":126.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_64_jeep-wrangler-jk-crash-bar-skid.jpg?v=1765579317"},{"product_id":"jk-vacuum-pump-relocation-kit","title":"JK Vacuum Pump Relocation Kit","description":"\u003cp\u003e\u003cspan\u003eIf you have a new low profile bumper the vacuum pump on your JK may be in the way, our JK vacuum pump relocation kit is the answer.  This kit is designed to move your vacuum pump out from under the front bumper to under the radiator.  This makes it possible to use a bumper that will recess your winch between the frame rails of your Jeep.  With our bracket there is no need to modify your factory wiring or hose lengths, all factory components can be used.  This kit includes all of the brackets and hardware that you will need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis will fit all 2012-Current Jeep JK's.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Vacuum_Pump_Installation_Instructions_6b7eaae1-048a-40bd-9ff1-bafd36fd54ad.pdf?v=1652370356\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43229411147854,"sku":null,"price":15.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_57_vacuum-pump-raw-steel.jpg?v=1765579503"},{"product_id":"fairlead-led-mount","title":"Fairlead LED Mount","description":"\u003cp\u003e\u003cspan\u003eOur Fairlead LED mount is a terrific place to mount your LED light bar or two smaller LEDs, so you can light up the night while out on the trail. This is a simple part, but it can save an incredible amount of time and precious space on your Jeep or trail rig. The fairlead bolt pattern matches all standard fairleads, and can be used with most 10 inch  LED light bars. These are designed to be used with a hawse style fairlead, roller type fairleads can cause interference.  This part comes unfinished,  you will need to paint or powder coat to your desired finish. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e  Can be used with most 10 inch  LED light bar \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e  Can be used with two individual smaller lights \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e  10 from center of bolt hole to center of bolt hole for mounting to the fairlead, ½ diameter bolt holes \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e  10 ¼ from center of bolt hole to center of bolt hole for mounting light bar or 2 lights, 5\/16 diameter bolt hole.\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230492229710,"sku":null,"price":7.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_3_fairlead-led-mount-3_1500x_9030c832-f868-4c08-bb5a-485f8e1ba7f8.jpg?v=1765646030"},{"product_id":"jk-license-plate-relocation-kit","title":"JK License Plate Relocation Kit","description":"\u003cp\u003e\u003cspan\u003eThe Barnes 4wd JK license plate relocation kit are for those with a Jeep Wrangler JK that want to move their license plate from the stock location to the center of their tailgate. The factory license plate mount is in a very vulnerable position on the Jeep JKs and is very susceptible to damage on the trail, this kit is a great way to get your plate up out of harms way. This kit can be used with or without a license plate as well, this is a great option for those that are removing there factory tire carrier, running an aftermarket tire carrier, and want to cover up the holes left behind after removal. The kit includes a tailgate plate that will bolt in place of the factory tire carrier, 3 flush mount plugs to plug the holes left after removing tire carrier and an LED tag light. All year model JKs can use this kit. This kit will come bare steel. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Tailgate_Plate_Install_New_78a69822-d8fe-4342-a870-8c4818c66aee.pdf?v=1683916250\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1651711870\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230493245518,"sku":null,"price":43.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_7_jk-license-plate-relocation-kit_eec1e500-3bf9-4b86-8fc1-addd955407e0.jpg?v=1765646151"},{"product_id":"led-license-plate-light","title":"LED License Plate Light","description":"\u003cdiv class=\"product__description rte\"\u003eIf you are looking for a simply bright way to light up your license plate, you have found it from Barnes 4wd with our L.E.D. license plate light. Often times it is necessary to relocate the license plate on our rigs to keep them out of harms way, or other modifications to the vehicle require relocation. In most states a proper license plate light is required, and failure to have one can often lead to being ticketed. This light is super bright, so no one should have any issues seeing your plate at night after installation. This light is waterproof and is made to stand up to the harsh conditions that your rig may be subject to.  Mounting hardware is included and this makes a perfect complement to our\u003cspan\u003e \u003c\/span\u003e. You will receive one light and mounting hardware.\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230495768654,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_6_b4wlpl.jpg?v=1765646391"},{"product_id":"jeep-jk-mini-rear-bumper","title":"Jeep JK Mini Rear Bumper","description":"\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eBumpers are made to order and are subject to a 4-6 week lead time once order is placed.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur Jeep JK mini rear bumper was designed to be as compact as possible, and will provide unparalleled clearance while out on the trail.  This bumper is designed to fit tight to the rear cross member on your Jeep and will work with most bolt on receiver hitches.  No modification to your Jeep is required, this bumper is 100% bolt on.  Two rear recovery points are included with the bumper, with clevis mounts that are 3\/4\" thick with the edges cut on a radius being soft shackle compatible. The hole is 1\" in diameter. The recovery points will slide inside the existing factory frame rail, creating a rugged recovery point should you ever find yourself or your buddy's hung up on the trail. Paint or powder coat is required during installation, this bumper will ship bare.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_Mini_Rear_Bumper_Installation_Instructions.pdf?v=1652362535\"\u003e\u003cimg border=\"0px\" alt=\"JK Mini Rear Bumper Installation Instructions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230496522318,"sku":null,"price":228.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_2_Jeep-JK-Rear-Low-Profile-Bumper-with-Recovery-Points_1500x_63492b18-18ad-480c-adea-94a419ac1050.jpg?v=1765646528"},{"product_id":"jeep-jk-rear-cb-antenna-bracket","title":"Jeep JK Rear CB Antenna Bracket","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eLooking for a strong way to mount an antenna on your Jeep JK? Then this is the bracket for you! Designed to bolt directly to your Jeep Wrangler Tailgate. This bracket will come bare steel with a 5\/8\" hole for an antenna. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230498652238,"sku":null,"price":9.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_4_jk-antenna-bracket_1445x_dd74eca2-7881-474c-b1f3-946a50d8141d.jpg?v=1765646568"},{"product_id":"jeep-jk-rear-recovery-point-kit","title":"Jeep JK Rear Recovery Point Kit","description":"\u003cp\u003e\u003cspan\u003eIf you are looking to completely remove the rear bumper on your Jeep JK but still want to have recovery points in the back, our Jeep JK rear recovery point kit is exactly what you need.  Installation of the recovery points is simple, slide the recovery points in the frame, place the flat plate on the outside of the frame, insert the threaded bracket, and install the hardware.  All brackets in this kit are powder coated texture black and all grade 8 installation hardware is included. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Rear_Recovery_Point_Kit_Install_Instructions.pdf?v=1652362665\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230498914382,"sku":null,"price":175.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_9_jk-rear-frame-recovery-points.jpg?v=1765646663"},{"product_id":"jk-pritchett-canyon-rear-bumper-welders-kit","title":"JK Pritchett Canyon Rear Bumper Welders Kit","description":"\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThis bumper is compatible with 2007-2018 Jeep Wrangler Models\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eA great DIY welding project\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eLaser Cut and CNC bent here in North Carolina.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe same proven designs we have sold and ran for years, now offered in an affordable ready to weld option.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eD-ring mounts are 1\/2\" thick 3\/4\" D-Ring compatible.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eMain body is bent and dimpled here in house, unlike most other options on the market that require the customer to bend a relief cut and then weld a long seam. This helps with the excessive warping and blending in traditional DIY bumper kits.\u003c\/li\u003e\n\u003cli\u003eInstallation of this bumper requires drilling\u003c\/li\u003e\n\u003cli\u003eThis bumper is not compatible with the factory spare tire carrier\u003c\/li\u003e\n\u003cli\u003eThis bumper will work with most receiver hitches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/B4WK12889.pdf?v=1718635285\"\u003e\u003cstrong\u003eWelding Instructions\u003c\/strong\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Rear_Tube_Bumper_Installation_Instructions.pdf?v=1652362689\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_95ddc4d1-ac2e-4c44-ba9f-b390e5507c87.jpg?v=1708971912\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230499405902,"sku":null,"price":292.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_19_B4WK12889s3.png?v=1765646822"},{"product_id":"jk-stubby-bumper-welders-kit","title":"JK Stubby Bumper Welders Kit","description":"\u003cul\u003e\n\u003cli\u003eA great DIY welding project\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eLaser Cut and CNC bent here in North Carolina.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eThe same proven designs we have sold and ran for years, now offered in an affordable ready to weld option.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eMain body is bent, unlike most other options on the market that require the customer to bend a relief cut and then weld a long seam. This helps with the excessive warping and blending in traditional DIY bumper kits.\u003c\/li\u003e\n\u003cli\u003e2012-2018 model you will need to relocate your vacuum pump. This can be done with our\u003ca href=\"https:\/\/barnes4wd.com\/products\/jk-vacuum-pump-relocation-kit\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eD-ring mounts are 3\/4\" thick with the edges cut on a radius being soft shackle compatible. The hole is 1\" in diameter.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/B4WK12918.pdf?v=1754398110\"\u003e\u003cstrong\u003eWELDING INSTRUCTIONS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230500520014,"sku":null,"price":257.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_B4WK12918.jpg?v=1765646919"},{"product_id":"jeep-jk-4-door-rocker-guards","title":"Jeep JK 4 Door Rocker Guards","description":"\u003cp\u003e\u003cspan\u003eLooking for some top of the line protection for the rockers on your Jeep 4 door JKU?  Our Jeep rocker guards will give you more protection than any other set on the market.  All of the other JK rocker guards on the market leave a small unprotected area at the end of the rockers near both tires, we made our rocker guards longer than the competitions so you get full coverage for the side of your Jeep.  Our rocker guards use 5\/16 countersunk hardware to give you the more strength.  These rocker guards are manufactured from high quality 3\/16\" steel and designed to take a lifetime of abuse.  All of the necessary installation hardware is included.  These will ship bare metal and will need to be painted or powder coated during installation.  This will fit all 4 door Jeep JKU's from 2007-2017\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003eRock Sliders\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIf you are looking for a tool to make the rivet nut installation easier and more efficient we prefer a tool made by Astro tools part #1442.  This tool can be purchased from several online retailers.\u003cbr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JKU_Rocker_Guard_With_Step_Installation_Instructions.pdf?v=1652362911\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230506680398,"sku":null,"price":384.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_13_4-Door-Jeep-Wrangler-Rock-Sliders.jpg?v=1765647547"},{"product_id":"jeep-jk-boatside-body-mounts","title":"Jeep JK Boatside Body Mounts","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eOur JK Boatside Body Mounts do multiple things for the end user. First, most factory JK body mounts get destroyed by rocks over the years of wheeling. So, if your going to replace them, this is a great option. Second, their boatside design will help you never get caught up on a body mount while on an obstacle again.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFits 2007-2018 Jeep JK Wranglers. Two door and four door models are different.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230510317646,"sku":null,"price":79.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_14_JK-Boat-Side-Body-Mount.jpg?v=1765647800"},{"product_id":"jeep-jk-super-duty-dana-60-steering-kit","title":"Jeep JK Super Duty Dana 60 Steering Kit","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWill not work with OX locker diff cover and non-low profile Superduty diff covers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLooking to get lock to lock steering on your Super Duty swapped Jeep JK and JKU? Then look no further. Our Barnes 4wd Jeep JK Super Duty Dana 60 Steering kit includes everything you need to add steering to your Super Duty swapped JK. This kit has been designed to achieve proper ackerman steering angles. The kit is sold with our 7\/8\" 2 piece heat treated chromoly hiem joints. The tie rod is manufactured from 1.75\" OD 3\/8\" wall DOM pre bent and cut to length. The drag link is manufactured from 1.5\" OD 1\/4\" wall DOM pre bent and cut to length. The weld on steering arms are laser cut in house from American 3\/8\" and 1\/4\" steel. The kit will ship bare steel and ready to weld with all grade 8 3\/4\" hardware.\u003c\/p\u003e\n\u003cp\u003eWelding and fabrication is required.\u003c\/p\u003e\n\u003cp\u003eHydraulic assist or steering stabilizer clamp sold\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuper Duty Dana 60 Axle Swap sold \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cp\u003e2007-2018 Jeep Wrangler JK and JKU\u003c\/p\u003e\n\u003cp\u003eAxle fitment:\u003c\/p\u003e\n\u003cp\u003e2005-2016 Super Duty Dana 60 From a F-250 or F-350  \u003c\/p\u003e\n\u003cp\u003eWheel Fitment:\u003c\/p\u003e\n\u003cp\u003e17\" wheels or greater with 5.25\" or less of back spacing \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Super_Duty_Steering_Kit_Installation_Instructions.pdf?v=1684234267\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_4e1afe61-7b43-4a49-9051-9f185b3aa576_480x480.jpg?v=1670262784\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230512087118,"sku":null,"price":704.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_51_Jeep-JK-Super-Duty-Swap-Steering-Kit.jpg?v=1765648029"},{"product_id":"jeep-jk-1-ton-7075-aluminum-tie-rod","title":"Jeep JK 1 Ton 7075 Aluminum Tie Rod","description":"\u003cdiv\u003e\u003cspan\u003eImportant notes!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e- This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks, however it is not \u003c\/span\u003e\u003cspan\u003eindestructible and we cannot guarantee that these links will hold up to all forces applied to them.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- This kit does not require any drilling\/reaming of the knuckles or pitman arm. It will bolt right in.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e- Stock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5 inches of backspacing or less. Depending on the design of \u003c\/span\u003e\u003cspan\u003esome aftermarket wheels \u003c\/span\u003e\u003cspan\u003eadditional spacers or steering stop adjustments could be needed.  \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- Steering Stabilizer brackets that mount outside of the stock location may run into clearance issues. This kit is designed to work with steering stabilizers that mount in the factory location.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003eOur Jeep JK 1 ton 7075 aluminum tie rod is one of the most important upgrades you can do to your Jeep JK, not only will you get larger stronger tie rod ends, but you will also gain the strength and weight savings of aluminum.  The factory steering on the JK is prone to bending with hard trail use, this is where the 7075 solid 1-1\/2 inch outer diameter linkages in this kit really shine.  7075 Aluminum is much lighter than steel, but 7075 aluminum is also much more elastic than steel.  7075 Aluminum can be flexed much farther than steel and still spring back to its original shape, this is very important on an application such as steering, because at some point you will hit your steering on something on the trail.  The tie rod ends in this kit are the GM 1 ton tie rod ends that have been used for years in extreme offroad applications.  This means you will have larger stronger tie rod ends with increased longevity. All components of this kit will bolt together, and the entire kit can easily be installed in a few hours with basic hand tools.  This kit is designed to go in the same location as the factory steering (under the knuckle).\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eKit Contents:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-7075-aluminium-replacement-tie-rod\"\u003eAluminum 7075 steering linkages\u003c\/a\u003e, polished (already cut to the proper length, both ends drilled and tapped)\u003c\/li\u003e\n\u003cli\u003e1 Steering stabilizer bracket\u003c\/li\u003e\n\u003cli\u003e1\u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234l-left-hand\"\u003e\u003cspan\u003e \u003c\/span\u003eOffset GM 1 Ton Tie Rod End OS2234L Left Hand\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234r-right-hand\"\u003eOffset GM 1 Ton Tie Rod End OS2234R Right Hand\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_Wrangler_JK_1_ton_7075_aluminum_tie_rod_installation_instructions-REV_10-3-18.pdf?v=1652362236\"\u003e\u003cimg border=\"0\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230512480334,"sku":null,"price":240.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_50_jeep-jk-aluminum-tie-rod.jpg?v=1765648169"},{"product_id":"jeep-jk-1-ton-7075-aluminum-steering-no-drilling-required","title":"Jeep JK 1 Ton 7075 Aluminum Steering (NO DRILLING REQUIRED)","description":"\u003cdiv\u003e\u003cspan\u003eImportant notes!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e- This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks, however it is not \u003c\/span\u003e\u003cspan\u003eindestructible and we cannot guarantee that these links will hold up to all forces applied to them.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e- This kit does not require any drilling\/reaming of the knuckles or pitman arm. It will bolt right in.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e- Stock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5\" of backspacing or less\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e- Depending on the design of some aftermarket wheels additional spacers or steering stop adjustments could be needed.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e- Steering Stabilizer brackets that mount outside of the stock location may run into clearance issues. This kit is designed to work with steering stabilizers that mount in the factory location.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003eOur Jeep JK 1 ton 7075 aluminum steering is one of the most important upgrades you can do to your Jeep JK, not only will you get larger stronger tie rod ends, but you will also gain the strength and weight savings of aluminum.  The factory steering on the JK is prone to bending with hard trail use, this is where the 7075 solid 1-1\/2 inch outer diameter linkages in this kit really shine.  7075 Aluminum is much lighter than steel, but 7075 aluminum is also much more elastic than steel.  7075 Aluminum can be flexed much farther than steel and still spring back to its original shape, this is very important on an application such as steering, because at some point you will hit your steering on something on the trail.  The tie rod ends in this kit are the GM 1 ton tie rod ends that have been used for years in extreme offroad applications.  This means you will have larger stronger tie rod ends with increased longevity. All components of this kit will bolt together, and the entire kit can easily be installed in a few hours with basic hand tools.  This kit is designed to go in the same location as the factory steering on the factory Dana 30 or Dana 44 (under the knuckle).\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eNO DRILLING REQUIRED \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eKit Contents:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-7075-aluminium-replacement-tie-rod\"\u003eAluminum 7075 Tie Rod\u003c\/a\u003e, polished (already cut to the proper length, both ends drilled and tapped)\u003c\/li\u003e\n\u003cli\u003e1 Aluminum drag link\u003c\/li\u003e\n\u003cli\u003e2 \u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234l-left-hand\"\u003eOffset GM 1 Ton Tie Rod End OS2234L LEFT HAND\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234r-right-hand\"\u003eOffset GM 1 Ton Tie Rod End OS2234R RIGHT HAND\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"https:\/\/barnes4wd.com\/products\/gm-1-ton-tie-rod-end-es2234r-right-hand\"\u003eGM 1 Ton Tie Rod End ES2234R RIGHT HAND DRIVER SIDE\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e1 Steering stabilizer bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_Wrangler_JK_1_ton_7075_aluminum_steering_kit_installation_instructions_Standard_TRE.pdf?v=1652362236\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230515789902,"sku":null,"price":401.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_jk-1-ton-aluminium-steering-drag-link-flip-kit-_28no-drilling-required_29_288x_adf0ec47-2a55-4824-b603-b68a8472a845.jpg?v=1765648513"},{"product_id":"jeep-jk-1-ton-7075-aluminum-steering-flip-kit","title":"JEEP JK 1 TON 7075 ALUMINUM STEERING FLIP KIT","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eImportant notes!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e- This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks, however it is not indestructible and we cannot guarantee that these links will hold up to all forces applied to them.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e- This kit requires any drilling\/reaming of the passenger side knuckle.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e- Stock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5\" of backspacing or less\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e- Depending on the design of some aftermarket wheels additional spacers or steering stop adjustments could be needed.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e- Steering Stabilizer brackets that mount outside of the stock location may run into clearance issues. This kit is designed to work with steering stabilizers that mount in the factory location.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eOur famed aluminum steering kit just got better. These is the same 1.5 solid aluminum links that come in our standard aluminum kit. However, the drag link will be installed over the knuckle for better linkage angles and keeps your drag link up out of harms way. This kit will included a drag link and a tie rod. Your steering linkage will come with our tried and true 1 ton tie rod ends. We've tested this kit around the US and have proven it to be strong and reliable. Whether you have a wheeling rig or a daily driver, this is the kit for you. \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eKit Includes:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-7075-aluminium-replacement-tie-rod\"\u003eAluminum Tie Rod\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e1 Aluminum Drag Link\u003c\/li\u003e\n\u003cli\u003e2\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234r-right-hand\"\u003e1 Ton Tie Rod Ends RH offset\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234l-left-hand\"\u003e1 Ton Tie Rod Ends LH offset\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/gm-1-ton-tie-rod-end-es2234l-left-hand\"\u003e1 Ton Tie Rod Ends LH standard\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 Steering Stabilizer Bracket \u003c\/li\u003e\n\u003cli\u003e1 \u003ca href=\"https:\/\/barnes4wd.com\/products\/tapered-steering-knuckle-insert\"\u003eTapered Steering Knuckle Insert\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_1_Ton_7075_Aluminum_Steering_Flip_Kit.pdf?v=1652362236\"\u003e\u003cimg border=\"0px\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230517559374,"sku":null,"price":425.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_46_jk-1-ton-aluminium-steering-drag-link-flip-kit.jpg?v=1765648574"},{"product_id":"1-5-i-d-steering-stabilizer-tube-clamp","title":"1.5 I.D. Steering Stabilizer Tube Clamp","description":"\u003cp\u003e\u003cspan\u003eIf you’re looking to beef up your steering stabilizer, or need a heavy-duty tube clamp for a cage. Barnes 4WD has you covered. Our 6-bolt tube clamp for 1.5” outer diameter tubing is the perfect solution over weak factory components. Barnes 4WD tube clamp features a 1\/2” – 20 Tpi stabilizer mounting bolt hole, and a ½” wall thickness. This clamp will fit any of our steering kits that include our 1 ½” outer diameter Dom Tubing. 1\/2\" -20 Bolt Not Included. This item is raw steel and will require painting or coating before installation. \u003c\/span\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230519361614,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_54_15-cage-clamp-steering-stabilizer.jpg?v=1765648914"},{"product_id":"jk-one-ton-heavy-duty-steering-upgrade-kit-d-i-y-no-reaming-required","title":"JK One Ton Heavy Duty Steering Upgrade Kit D.I.Y. (No Reaming Required)","description":"\u003cdiv\u003eIf you are looking for a serious upgrade for the steering on your Jeep JK, this is the steering kit that you need.  This 1 ton kit uses quality heavy duty components that will stand up to all the trail abuse that you can throw at them.  This kit will require cutting the tubing to the proper length for your application, and welding in the provided tube inserts.  The tie rod ends are plug and play on every part of the JK. This kit is designed to be ran under the knuckles in the factory location.  \u003c\/div\u003e\n\u003cdiv\u003eKit Contents: \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eImportant installation note!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e- Stock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5 inches of backspacing or less. Depending on the design of some aftermarket wheels additional spacers or steering stop adjustments could be needed. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- Steering Stabilizer brackets that mount outside of the stock location may run into clearance issues. This kit is designed to work with steering stabilizers that mount in the factory location.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230520016974,"sku":null,"price":369.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_37_jk-steering-upgrade-_28b4wk1146_29.jpg?v=1765649021"},{"product_id":"jeep-jk-1-ton-7075-aluminum-drag-link-over-the-knuckle","title":"JEEP JK 1 TON 7075 ALUMINUM DRAG LINK (OVER THE KNUCKLE)","description":"\u003cdiv\u003eIf your looking to beef up the drag link on your Jeep JK, this is the upgrade for you. We have taken our famed 7075 aluminum drag link, and have modified it to be installed over the knuckle. This will correct your steering linkage angles if you have any lift on your Jeep Jk. This will help with tightness in your steering and help reduce bump steer on the road. The tie rod ends in this kit are our 1-ton tie rod ends that have been proven to have great strength and reliability. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e This kit requires at least 2.5\" of suspension lift.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eImportant installation note!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eStock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5 inches of backspacing or less!\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWhen flipping the drag link a raised axle side track-bar bracket is recommended. \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp class=\"MsoNormal\"\u003eWhen flipping the drag link a raised axle side track bar bracket is recommended. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eDrag Link Flip Kit Includes:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1 Aluminum Drag Link \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230520344654,"sku":null,"price":197.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_5_jk-1-ton-aluminium-over-the-knuckle-drag-link_1445x_5519d425-d00f-41d7-b2fa-1717c225eab9.jpg?v=1765649086"},{"product_id":"jeep-jk-1-ton-7075-aluminum-drag-link-no-drilling-required","title":"Jeep JK 1 Ton 7075 Aluminum Drag Link (No Drilling Required)","description":"\u003cp\u003eIf you are looking to beef up the drag link on your Jeep JK, this is the upgrade for you. This kit can be put together in minutes and installed on your jeep with ease. This kit is made from a solid piece of 7075 aluminum and is not only stronger than your factory drag link, but it is lighter as well. It is made to be installed under the knuckle just as your factory drag link is. This kit has everything you will need to replace your factory drag link in an afternoon. This kit is made to work with every year Jeep JK and JKU.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eImportant notes!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e- This kit does not include a lifetime warranty. Aluminum is much more elastic that DOM and will serve you better on the rocks, however it is not \u003c\/span\u003e\u003cspan\u003eindestructible and we cannot guarantee that these links will hold up to all forces applied to them.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- This kit does not require any drilling\/reaming of the knuckles or pitman arm. It will bolt right in.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- Stock wheels will require 1.5\" wheel spacers, or you will need a 17\" wheel with 4.5 inches of backspacing or less!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- Steering Stabilizer brackets that mount outside of the stock location may run into clearance issues. This kit is designed to work with steering stabilizers that mount in the factory location.\u003c\/span\u003e\u003c\/div\u003e\n \n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eKit Includes:\u003c\/div\u003e\n\u003cdiv\u003e1 One Ton 7075 Aluminum Drag Link\u003c\/div\u003e\n\u003cdiv\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/offset-gm-1-ton-tie-rod-end-os2234l-left-hand\"\u003eGM 1 Ton Tie Rod End Offset LH\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/gm-1-ton-tie-rod-end-es2234r-right-hand\"\u003eGM 1 Ton Tie Rod End Standard Right Hand\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_Wrangler_JK_1_ton_7075_aluminum_drag_link_kit_installation_instructions_Rev_B.pdf?v=1652362236\"\u003e\u003cimg border=\"0px\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230531092558,"sku":null,"price":193.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_14_jeep-jk-1-ton-aluminum-drag-link-new.jpg?v=1765649395"},{"product_id":"1-ton-offset-drag-link","title":"1 Ton Offset Drag Link","description":"\u003cp\u003e\u003cspan\u003eIf you are looking for a heavy duty upgrade for your existing drag link, then the Barnes 4wd one ton offset drag link kit is for you!  This is a D.I.Y. kit that includes all the parts that you need to replace your existing drag link. We suggest this kit for under the knuckle applications on a Jeep JK. \u003c\/span\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230536007758,"sku":null,"price":196.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_8_1-ton-offset-drag-link-_28b4wk12299d_29.jpg?v=1765649507"},{"product_id":"jeep-jk-1-ton-7075-aluminum-replacement-tie-rod","title":"JEEP JK 1 TON 7075 ALUMINUM REPLACEMENT TIE ROD","description":"\u003cp\u003e\u003cspan\u003eThis is a replacement tie rod for our Jeep JK 1 Ton 7075 Aluminum Kits.\u003c\/span\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230536400974,"sku":null,"price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_37_aluminum-tie-rod.jpg?v=1765649595"},{"product_id":"jeep-jk-superduty-dana-60-axle-truss-swap-kit","title":"Jeep JK Superduty Dana 60 Axle Truss Swap Kit","description":"\u003cdiv\u003eWe designed our Jeep JK Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 1999-2004, or 2005-2022 Ford Superduty in the front of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Dana 60 driver drop front axle out of a 1999-2004, or 2005-2022 Ford F-250 or F-350.  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss, set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a Dana 60 under your Jeep JK, welding is required.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eTrimming of the casting is required\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the Superduty Dana 60 is 8x170 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-swap-offset-front-lower-control-arm-kit?_pos=1\u0026amp;_sid=054ac7c45\u0026amp;_ss=r\"\u003eCustom lower control arms\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand a custom track bar is required.  \u003c\/div\u003e\n\u003cdiv\u003eA new frame side track bar bracket is included.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft modifications, vent tube, and steering linkages are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_Superduty_1_Ton_Dana_60_2005_8dd02585-f389-48e8-90e0-39b4edd5c6b6.pdf?v=1747935172\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230537154638,"sku":null,"price":313.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_jeep-jk-superduty-truss-kit.jpg?v=1765649799"},{"product_id":"jeep-jk-1-ton-front-track-bar-bracket","title":"Jeep JK 1 Ton Front Track Bar Bracket","description":"\u003cdiv\u003e\u003cspan\u003eINSTALLATION NOTES:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- This kit moves the track bar bracket forward two inches, therefore steering stops may have to be adjusted to keep pitman arm from contacting track bar bracket. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eIf you have swapped a 1 ton axle into your JK or JKU Wrangler you will need to move the front frame track bar bracket forward to accommodate the larger axle housing.  This bracket is designed to move the track bar mount forward 2 inches from the stock location.  A 1-5\/8 inch mounting width and a 14mm (or 9\/16) bolt hole is used with this bracket, the same as the OEM mounting width and bolt hole.  This bracket is a 2 piece design that is fabricated from 1\/4\" thick steel.  A tab has been added to locate the bracket in the appropriate location, simply line the hole in the bracket up with the bottom front bolt hole for the steering box and weld in place.  This bracket may accommodate some aftermarket adjustable track bars, however depending on lift height and several other factors a custom track bar may need to be fabricated.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_1_Ton_Front_Track_Bar_Bracket.pdf?v=1652362128\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230539022414,"sku":null,"price":25.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_62_jk-1-ton-front-track-bar-bracket.jpg?v=1765650103"},{"product_id":"jeep-jk-gm-14-bolt-one-ton-axle-truss-swap-kit","title":"Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit","description":"\u003cp\u003e\u003cspan\u003eWe designed our Jeep JK GM 14 bolt swap kit to make it easy for you to put a one ton GM 14 Bolt in the back of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a GM 14 bolt (AAM 10.5) rear axle out of a 1999-2006 GM single rear wheel 2500 or 3500 pickup .  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss and set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a 14 bolt under your Jeep JK, welding is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eAll parts of truss are keyed to fit together, for ease of installation and minimal measuring!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg width=\"300\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/TrackBar.jpg?v=1642498915\" border=\"0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003e-This kit will not work with the older non \"ribbed\" 14 bolt housings\u003c\/div\u003e\n\u003cdiv\u003e-The lug pattern on the 14 bolt is 8x6.5 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003e-Brake lines, driveshaft, ABS, and vent tube modifications are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e-This kit requires a 14 bolt with a WMS-WMS of at least 68”. This axle is found in 1999-2006 GM 2500 and 3500 single rear wheel trucks. This is the newer style “ribbed” housing, this kit will not work with the older 14 bolt housing. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_GM_14_Bolt_Axle_Truss_Swap_Kit_V2.0.pdf?v=1652362203\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230540529742,"sku":null,"price":247.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_14_jk-14-bolt-swap.jpg?v=1765650259"},{"product_id":"jk-14-bolt-swap-tone-rings","title":"JK 14 Bolt Swap Tone Rings","description":"\u003cdiv\u003eLooking for the parts to complete your GM 14 Bolt Swap in your Jeep JK? When doing an axle swap on your Jeep JK it is important that you get the information that the computer is looking for to help eliminate codes and limp mode issue. These tone rings and ABS sensor brackets are designed to do just that. The kit will come with 2 Tone rings 2 ABS sensor brackets and a hole saw drill jig. These tone rings are designed to only be used with a GM 14 Bolt (AAM 10.5) rear axle out of a 1999-2006 GM single rear wheel 2500 or 3500 tuck with factory disk brakes going into a 2007-2018 Jeep JK or JKU. The kit will reuse the factory rear ABS sensors and wiring. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIt is important that you match the tone ring tooth count to the front axle that you have in your Jeep JK. 1999-2022 Super duty dana 60 will have 60 tooth tone rings. Factory JK or aftermarket axles will have 52 tooth tone rings.\u003c\/div\u003e\n\u003cdiv\u003e   \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMachining of the 14 Bolt Hubs is required. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eAn optional tuner may be required to adjust axle ratio and and tire size. 60 tooth tone rings may cause the speedometer to be off 1-3%.   \u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_14_Bolt_Swap_Tone_Rings_Installation_Instructions.pdf?v=1652362183\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230552031310,"sku":null,"price":38.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_2_jk-14-bolt-swap-tone-rings_1500x_48088503-2c00-4be7-9e0e-2f476eebe0f1.jpg?v=1765650453"},{"product_id":"jeep-jk-superduty-dana-60-axle-truss-swap-kit-for-3-link-front-suspension","title":"Jeep JK Superduty Dana 60 Axle Truss Swap Kit For 3 Link Front Suspension","description":"\u003cdiv\u003eWe designed our Jeep JK Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 1999-2004, or 2005-2022 Ford Superduty in the front of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Dana 60 driver drop front axle out of a 1999-2004, or 2005-2022 Ford F-250 or F-350.  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss, set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a Dana 60 under your Jeep JK, welding is required.  This kit is designed to be used in conjunction with a custom 3 link front suspension, the upper link mount features a 2-5\/8 inch mounting width and a 9\/16 inch bolt hole.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eA 3 link front suspension is required to use this kit\u003c\/div\u003e\n\u003cdiv\u003eTrimming of the casting on the drivers side and the inner C's is required\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the Superduty Dana 60 is 8x170 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-swap-offset-front-lower-control-arm-kit?_pos=1\u0026amp;_sid=054ac7c45\u0026amp;_ss=r\"\u003eCustom lower control arms\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand a custom track bar is required.  \u003c\/div\u003e\n\u003cdiv\u003eA new frame side track bar bracket is included.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft modifications, vent tube, and steering linkages are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_SD_60_Swap_Truss_Kit_3_Link_Upper_65359c5d-009d-442f-a0a1-9a7ccbec147e.pdf?v=1747932019\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230553931854,"sku":null,"price":292.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_16_jk-super-duty-3-link-kit.jpg?v=1765650549"},{"product_id":"jeep-jk-sterling-10-25-or-10-5-one-ton-axle-truss-swap-kit","title":"Jeep JK Sterling 10.25 or 10.5 One Ton Axle Truss Swap Kit","description":"\u003cp\u003e\u003cspan\u003eWe designed our Jeep JK Sterling 10.25 and 10.5 swap kit to make it easy for you to put a one ton Ford Sterling axle in the back of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Sterling 10.25 or 10.5 rear axle out of a Ford single rear wheel F250 or F350 pickup .  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss, set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a Sterling axle under your Jeep JK, welding is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eAll parts of truss are keyed to fit together, for ease of installation and minimal measuring!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg width=\"300\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/TrackBar.jpg?v=1642498915\" border=\"0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003e-The lug pattern on the Sterling is 8x6.5 or 8x170mm this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003e-Brake lines, driveshaft, ABS, and vent tube modifications are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e-\u003cspan\u003eThe pinion on the Sterling will interfere with the fuel tank on the JK.  The fuel tank will need to be relocated!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Sterling_to_JK_Rear_Axle_Swap_Kit.pdf?v=1652362768\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230554587214,"sku":null,"price":261.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_jeep-jk-1-ton-sterling-truss.jpg?v=1765650654"},{"product_id":"jeep-jk-gm-14-bolt-one-ton-axle-truss-swap-kit-3-link","title":"Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","description":"\u003cp\u003e\u003cspan\u003eWe designed our Jeep JK GM 14 bolt swap kit to make it easy for you to put a one ton GM 14 Bolt in the back of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a GM 14 bolt (AAM 10.5) rear axle out of a 1999-2006 GM single rear wheel 2500 or 3500 pickup .  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss and set the angle, and all other components will locate off from the truss.  This kit is used if you are looking to convert the rear of your Jeep to a 3 link suspension, this is not compatible with the stock rear upper control arms or frame mounts.  Welding is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eAll parts of truss are keyed to fit together, for ease of installation and minimal measuring!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg width=\"300\" alt=\"\" src=\"https:\/\/www.barnes4wd.com\/https:\/\/www.barnes4wd.com\/assets\/images\/Jeep%20Specific\/Jeep%20Suspension\/Track%20Bar.jpg\" border=\"0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eThis kit will not work with the older non \"ribbed\" 14 bolt housings\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the 14 bolt is 8x6.5 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft, ABS, upper control arm, frame side upper control arm mount, and vent tube modifications are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_GM_14_Bolt_Axle_Truss_Swap_Kit_3_Link.pdf?v=1652362203\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230555570254,"sku":null,"price":261.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_34_jk-14-bolt-swap.jpg?v=1765650727"},{"product_id":"jeep-jk-sterling-10-25-or-10-5-one-ton-axle-truss-swap-kit-3-link","title":"Jeep JK Sterling 10.25 or 10.5 One Ton Axle Truss Swap Kit 3 Link","description":"\u003cdiv class=\"product__description rte\"\u003eWe designed our Jeep JK Sterling 10.25 or 10.5 swap kit to make it easy for you to put a one ton Sterling 1 ton axle in the back of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Sterling 10.25 or 10.5 rear axle out of a Ford Superduty single rear wheel F250 or F350 pickup .  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss and set the angle, and all other components will locate off from the truss.  This kit is used if you are looking to convert the rear of your Jeep to a 3 link suspension, this is not compatible with the stock rear upper control arms or frame mounts.  Welding is required.\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eAll parts of truss are keyed to fit together, for ease of installation and minimal measuring!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg width=\"300\" alt=\"\" src=\"https:\/\/www.barnes4wd.com\/https:\/\/www.barnes4wd.com\/assets\/images\/Jeep%20Specific\/Jeep%20Suspension\/Track%20Bar.jpg\" border=\"0\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the Sterling is 8x6.5 or 8x170mm this will not match the factory lug pattern on the front axle of your Jeep.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft, ABS, upper control arm, frame side upper control arm mount, and vent tube modifications are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe pinion on the Sterling will interfere with the fuel tank on the JK.  The fuel tank will need to be relocated!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Sterling_to_JK_Rear_Axle_Swap_Kit_3_Link.pdf?v=1652362769\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230556127310,"sku":null,"price":249.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_16_wrangler-1-ton-3-link-truss.jpg?v=1765650875"},{"product_id":"jeep-jk-1-ton-swap-offset-front-lower-control-arm-kit","title":"Jeep JK 1 Ton Swap Offset Front Lower Control Arm Kit","description":"\u003cp\u003e\u003cspan\u003eThis front lower control arm kit is designed to make swapping a Superduty Dana 60 axle into you Jeep Wrangler JK or JKU even easier!  Due to the size of the casting on the 1 ton Super Duty axle the lower control arm mounts have to be located farther apart.  While some control arms can be reused after the swap the operating angle of the suspension joints are usually less than ideal.  This kit includes two joints with a 10 degree offset, this offset moves the joints to the middle of their travel to avoid binding and provide maximum articulation.  This allows you to retain the factory frame side lower control arm mounts.  A piece of 2 inch diameter tubing with a 1\/4 inch wall is included so you can customize the length of the arm to your lift height.   This kit will require cutting, welding and general fabrication skills.  \u003c\/span\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230556618830,"sku":null,"price":427.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_jk-offset-lower-control-arms.jpg?v=1765650954"},{"product_id":"9-16-inch-sleeve-for-axle-swap-kits","title":"9\/16 Inch Sleeve For Axle Swap Kits","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eThis heavy duty sleeve is a product that we designed for folks that want to run our TJ, JK, XJ, JL, JT axle swap kits with a 9\/16 inch bolt on their front axle upper control arms.  This sleeve is a direct replacement for the smaller bore sleeve included in our axle swap kits.  This sleeve is not compatible with the factory rubber control arm bushings.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230559109198,"sku":null,"price":2.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_2_shock-dom-sleeve_1500x_6566197d-ce12-4096-8507-78cfdf3589c7.jpg?v=1765651224"},{"product_id":"jeep-jk-superduty-60-swap-upper-control-arm-replacement-brackets","title":"Jeep JK Superduty 60 Swap Upper Control Arm Replacement Brackets","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cdiv\u003eWe designed our Jeep JK Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 1999-2004, or 2005-2022 Ford Superduty in the front of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Dana 60 driver drop front axle out of a 1999-2004, or 2005-2022 Ford F-250 or F-350.  All parts of this kit are keyed to the truss, making installation a breeze.  \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eThese are only the front upper control arm brackets from our B4WK12324 kit. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003e- Outer tube must be welded to the supplied brackets, see kit number\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eB4WK12324 instructions for full detailed breakdown\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230559961166,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_17_JK_Upper.png?v=1765651295"},{"product_id":"jk-inner-c-gussets","title":"JK Inner C Gussets","description":"\u003cp\u003eWith the way that people are wheeling their JK's now bent axles are all too common. One common point for the JK front axle to bend is at the inner C s. The Barnes 4WD JK Inner C Gussets will prevent this from happening. These gussets will work on your JK no matter if it have a Dana 30 or if you have a Rubicon with a Dana 44. The gussets are cut to be a precise fit to your axle and inner C.  Remove the ball joints from your axle before installation!  \u003c\/p\u003e\n\u003cdiv\u003e(not compatible with J8 of HD axle housings)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_INNER_C_GUSSETS_INSTALL_INSTRUCTIONS.pdf?v=1652362483\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230564548686,"sku":null,"price":35.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_51_JK-Inner-C-Gusset-1.jpg?v=1765651601"},{"product_id":"jeep-jk-front-axle-tube-sleeves","title":"Jeep JK Front Axle Tube Sleeves","description":"\u003cp\u003e\u003cspan\u003eOur Jeep JK tube sleeves are designed to add strength to the thin, and bend prone front axle tubes on your Jeep Wrangler.  Today two different types of tube sleeves are available press in and weld in.  While the press in tube sleeves offer the convenience of not having to weld, they also sacrifice strength.  The press in tubes only have one point of contact at the outer end of the axle tube that relies on an interference fit.  Our weld in version offers up to 9 points of contact, that when welded become a part of the existing axle tube.  These sleeves are compatible with 35 spline aftermarket axle shafts.  You will receive two tube sleeves one short and one long, removal and disassembly of your axle is required, and welding is required.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e(Not compatible with J8 or HD Dana 44 axle housings)\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_Wrangler_Tube_Sleeves.pdf?v=1652362255\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230565236814,"sku":null,"price":56.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_53_jk-axle-tube-sleeves.jpg?v=1765651685"},{"product_id":"pro-series-jeep-jk-dana-44-rear-axle-truss","title":"Pro Series Jeep JK Dana 44 Rear Axle Truss","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eThe Barnes 4WD Pro Series Jeep JK Dana 44 Rear Axle Trusses are made from 1\/4\" steel to keep them light but incredibly strong. This truss is made to be a precise fit to the Jeep JK rear Dana 44 (Rubicon or Standard) but can be modified to fit other rear Dana 44's. If you are four linking your rig this truss is designed to give you as low of a mounting point as possible for your upper links.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230565924942,"sku":null,"price":59.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_54_jk-rear-axle-truss.jpg?v=1765651788"},{"product_id":"pro-series-jeep-jk-dana-44-front-axle-truss","title":"Pro Series Jeep JK Dana 44 Front Axle Truss","description":"\u003cp\u003e\u003cspan\u003eThe Barnes 4WD Pro Series Jeep JK Dana 44 Front Axle Truss is made from a combination of 1\/4\" and 3\/16\" steel to keep them light but incredibly strong. This truss is made to be a precise fit to the Jeep JK Front Dana 44 Rubicon. These trusses are made to span the full length of your housing to prevent bent or broken axle tubes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Front_Truss_6bb51eb2-05f5-4617-a11f-db828bf13829.pdf?v=1665600679\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230567071822,"sku":null,"price":54.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_JK-Front-Dana-30-Axle-Truss_7fb7ba99-f2e9-45f9-bbb2-652f7a95779d.jpg?v=1765651868"},{"product_id":"jk-front-lower-control-arm-mount-skids","title":"JK Front Lower Control Arm Mount Skids","description":"\u003cp\u003e\u003cspan\u003eIf you are looking for the ultimate in protection for the front lower control arm mount on your Jeep Wrangler JK, you have found them with our JK front lower control arm skids. We start with our super strong 3\/16 thick material, we then cut them out with the latest CNC laser technology, form them to exact specifications on a CNC press brake and it all happens right here in the USA! Not only will you have protection for your lower control arm suspension joints, this will add much needed reinforcement to you lower control arm mounts that hang low and are very susceptible to being bent or deformed when coming into contact with obstacles on the trail. If you want the best JK front lower control arm skids on the market you have come to the right place. You will receive one pair of skids, welding is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_FRONT_LOWER_CONTROL_ARM_MOUNT_SKIDS.pdf?v=1652362344\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230567661646,"sku":null,"price":16.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_41_JK-Front-Lower-Control-Arm-Skid-1.jpg?v=1765651944"},{"product_id":"pro-series-jeep-jk-dana-30-front-axle-truss","title":"Pro Series Jeep JK Dana 30 Front Axle Truss","description":"\u003cp\u003e\u003cspan\u003eThe Barnes 4WD Pro Series Jeep Dana 30 Front Axle Truss is made from a combination of 1\/4\" and 3\/16\" steel to keep them light but incredibly strong. This truss is made to be a precise fit to the Jeep standard JK Front Dana 30. These trusses are made to span the full length of your housing to prevent bent or broken axle tubes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Front_Truss.pdf?v=1652362911\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230568513614,"sku":null,"price":55.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_33_JK-Front-Dana-30-Axle-Truss_7fb7ba99-f2e9-45f9-bbb2-652f7a95779d.jpg?v=1765652025"},{"product_id":"jk-rear-lower-control-arm-mount-skid","title":"JK Rear Lower Control Arm Mount Skid","description":"\u003cp\u003e\u003cspan\u003eBarnes 4wd is proud to introduce our JK rear lower control arm mount skids, these are the paramount in underbody protection for your Jeep Wrangler JK. The JK is an ideal off road platform, several of the shortcomings of the earlier model Wranglers have been addressed, however there are still a few parts that need protection from obstacles on the trail, the rear lower control arm and shock mount is a perfect example of this. The lower control arm and shock mount brackets are several inches lower than the axle tubes on the JKs, and are made from very thin sheet metal, when they come into contact with rocks and other debris they are prone to bending and the rear shocks can be damaged very easily, our skids are the perfect solution, and address all of these issues. Unlike other company s designs our brackets are laser cut and precision formed from one piece of our 3\/16 thick steel, what this means is you will get stronger skids than what the competition offers, lighter, more abrasion resistant, less prone to bending and deformation, and much needed reinforcement of your factory brackets. Our skids will also protect your shocks, this is a feature that is missing from many other designs that only reinforce the front of the control arm bracket. Drain holes have also been integrated in several key areas to minimize the buildup of debris that can promote rust over time. You will receive on pair of skids for the left and right, and welding is required for installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JEEP_JK_Rear_Axle_Lower_Control_Arm_Skid1_Install_Instructions_ba626776-a759-410f-817d-c6dcac4c2636.pdf?v=1674589488\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230568808526,"sku":null,"price":37.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_43_jk-rear-lower-control-arm-skid-1.jpg?v=1765652129"},{"product_id":"jeep-wrangler-jk-dana-44-truss-with-upper-3-link-mount","title":"Jeep Wrangler JK Dana 44 Truss With Upper 3 Link Mount","description":"\u003cp\u003e\u003cspan\u003eWe designed this rear axle truss with 3 link mount for the folks that are looking to take their 2007-2018 Jeep Wrangler JK or JKU to the next level with a custom, bind free 3 link suspension.  This axle truss is designed to strengthen your rear axle, while also giving you a location to mount an upper link for a 3 link rear suspension.  The upper link mount accepts a 2-5\/8 inch wide suspension joint with a 9\/16 inch bolt, three mounting locations are incorporated 1 inch apart so you can fine tune your anti-squat numbers to your exact needs.  Heavy duty 1\/4 inch and 3\/16 inch steel is used throughout the structure of this truss for strength and durability.  This kit will fit all Jeep Wrangler JK model Dana 44 rear axles.  This part will ship bare and requires welding and fabrication to install.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_and_JKU_Rear_3_Link_Axle_Truss_and_3_Link_Mount_Kit_Installation_Instructions.pdf?v=1652362298\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230570381390,"sku":null,"price":76.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_7_jeep-wrangler-jk-rear-axle-bridge-with-link-mount_1445x_7cdfa9cb-1c3d-4d45-8797-763177440ac0.jpg?v=1765652236"},{"product_id":"jeep-jk-jl-jt-4-rear-bump-stop-extension-kit-3","title":"Jeep JK\/JL\/JT 4\" Rear Bump Stop Extension Kit","description":"\u003cp\u003eIf you have lifted your Jeep Wrangler JK, JL, Jeep Gladiator, or changed tire sizes, you may need to limit the up travel of your rear suspension with our bump stop extensions.  This extension kit will bolt into place utilizing existing holes in the factory lower bump stop pad (JK and JL only).  As a rule of thumb a 3 inch kit is good for 35 inch tires, and a 4 inch kit for 37 inch tires, however this can vary depending on the aftermarket components installed on your vehicle.  We always recommend flexing your suspension and measuring the length of the extension kit that is right for your Jeep.  You will receive 2 bump stop extensions and all of the required installation hardware, the parts will ship bare and will need to be painted or powder coated before installation. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo install these bump stop extensions on a Jeep Gladiator, you will need to mark new bolt holes on to your factory bump stop pad and drill the new holes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_JL_JT_Rear_Bump_Stop_Extensions_Installation_Instructions.pdf?v=1702043010\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_67f320a9-1a07-496d-a5cc-6fb82c377b8a_480x480.jpg?v=1698851676\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230571593806,"sku":null,"price":65.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_42_Jeep-Wrangler-JL-JK-JT-4-inch-Rear-Bumpstop-Extensions_1.jpg?v=1765652514"},{"product_id":"jeep-jk-jl-jt-3-rear-bump-stop-extension-kit-3","title":"Jeep JK\/JL\/JT 3\" Rear Bump Stop Extension Kit","description":"\u003cp\u003eIf you have lifted your Jeep Wrangler JK, JL, Jeep Gladiator, or changed tire sizes, you may need to limit the up travel of your rear suspension with our bump stop extensions.  This extension kit will bolt into place utilizing existing holes in the factory lower bump stop pad (JK and JL only).  As a rule of thumb a 3 inch kit is good for 35 inch tires, and a 4 inch kit for 37 inch tires, however this can vary depending on the aftermarket components installed on your vehicle.  We always recommend flexing your suspension and measuring the length of the extension kit that is right for your Jeep.  You will receive 2 bump stop extensions and all of the required installation hardware, the parts will ship bare and will need to be painted or powder coated before installation. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo install these bump stop extensions on a Jeep Gladiator, you will need to mark new bolt holes on to your factory bump stop pad and drill the new holes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_JL_JT_Rear_Bump_Stop_Extensions_Installation_Instructions.pdf?v=1702043010\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_67f320a9-1a07-496d-a5cc-6fb82c377b8a_480x480.jpg?v=1698851676\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230572707918,"sku":null,"price":33.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_25_Jeep-Wrangler-JL-JK-JT-4-inch-Rear-Bumpstop-Extensions_2.jpg?v=1765652467"},{"product_id":"jeep-wrangler-jk-8-rear-suspension-stretch-kit","title":"Jeep Wrangler JK 8\" Rear Suspension Stretch Kit","description":"\u003cp\u003eIf you are looking for a longer wheelbase for your Jeep Wrangler JK for an excellent departure angle and greater offroad performance, we have you covered with our Jeep Wrangler JK 8\" rear suspension stretch kit.  This kit will move the rear axle back 8 inches to give you a 103 inch wheelbase for tackling those difficult obstacles.  All required frame brackets are included to move your springs, shocks, bump stops, and sway bar to the correct location.  Heavy duty DOM material is included to fabricate your upper and lower links, 2\"x1\/4\" heavy wall tubing for the lowers, and 1-3\/4\"x1\/8\" wall prebent and cut to length for your uppers.  Your existing frame and axle link brackets will be reused, saving you valuable time and money during installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is compatible with 2007-2018 Jeep Wrangler JK and JK Unlimited models\u003c\/li\u003e\n\u003cli\u003eWelding and extensive fabrication work is involved to install this kit, please consult the installation instructions for details\u003c\/li\u003e\n\u003cli\u003eExtensive body work will be required to allow proper tire clearance\u003c\/li\u003e\n\u003cli\u003eThis kit will lower the frame coil spring mounting location in the rear, 2-1\/2\"-3\" shorter springs will be required to achieve a level ride height \u003c\/li\u003e\n\u003cli\u003eOur Pritchett Canyon bumpers will require modification or a wider track width with 37\" tires or larger.  Our \u003cspan\u003eis compatible without modification.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/JK_Rear_Stretch_Kit_Installation_Instructions.pdf?v=1677246767\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Installation-Instructions-Icon_9852d869-88fb-4e0e-bf63-35e35ef66758_480x480.jpg?v=1658505200\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230575657038,"sku":null,"price":974.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_6_Wrangler-JK-Rear-Suspension-Stretch_1445x_39153c28-ca1a-4060-a867-651232bddace.jpg?v=1765652671"},{"product_id":"jeep-jk-and-jku-front-and-rear-3-link-suspension-kit","title":"Jeep JK and JKU Front and Rear 3 Link Suspension Kit","description":"\u003cp\u003eUnleash the true potential of your 2007-2018 Jeep Wrangler JK or JKU, free up suspension articulation, and improve your off road performance with our front and rear DIY 3 link kit!  We designed this kit to be the best of both worlds, with excellent street manners while not compromising off road performance.  All of the brackets in this kit are designed to use existing features on the frame of your Jeep for perfect alignment with minimal labor.  Constructed from 3\/16 inch and 1\/4 inch steel all of the suspension brackets are built to take abuse and keep coming back for more.  Both front and rear upper link mounts include multiple holes, enabling your anti-squat and anti-dive to be fine tuned to your exact needs.  Our re-buildable and grease-able Enduro joints are included, ensuring long life, minimal noise, ease of maintenance, and extreme articulation.  Steel drawn over mandrel seamless tubing is included for the fabrication of your control arms, the upper link tubing is 1-3\/4 inch O.D. x 1\/8 inch wall tubing, and the lower link tubing is 2 inch O.D. x 1\/4 inch wall.  If you already have a lift kit installed on your Jeep don't worry, most springs, shocks, and adjustable track bars are going to be compatible with this kit and can be re-used, however a one ton axles may require shorter springs in the front and custom track bars.  This kit is compatible with stock Dana 30 and Dana 44 axles as well as with 1 ton axles with our swap trusses, you can choose the options that best suit your axle configuration in the options above.  If you have questions about which option is right for you, give us a call and we will be happy to help you out.  Welding and general metal fabrication skills are required to install this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImportant Note: Once installed, flex test the vehicle and ensure suspension joints are not being flexed past their maximum capacity with your lift height. This will cause the joints to prematurely wear. If so, limit straps and bump stops may be necessary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAll components are included to install a 3 link front and rear suspension on your Jeep\u003c\/li\u003e\n\u003cli\u003eLonger control arms means better ride and more articulation\u003c\/li\u003e\n\u003cli\u003eAll components are designed to be easy to position and install\u003c\/li\u003e\n\u003cli\u003eExcellent offroad performance while maintaining good highway characteristics \u003c\/li\u003e\n\u003cli\u003eCan be used with stock axles or 1 ton axles with our 1 ton axle swap kit\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_3_Link_Frame_Bracket_Kit_And_Links_Installation_Instructions.pdf?v=1652362157\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"2007-2011 \/ Dana 30 or Dana 44 Link Tower \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590140494,"sku":null,"price":1900.89,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Dana 30 or Dana 44 Link Tower \/ Flat Bottom Link Mount With Hardware","offer_id":43230590173262,"sku":null,"price":1983.5,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Dana 30 or Dana 44 Link Tower \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590206030,"sku":null,"price":2085.55,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Flat Bottom Link Mount With Hardware \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590238798,"sku":null,"price":1883.71,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Flat Bottom Link Mount With Hardware \/ Flat Bottom Link Mount With Hardware","offer_id":43230590271566,"sku":null,"price":1837.7,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Flat Bottom Link Mount With Hardware \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590304334,"sku":null,"price":2067.86,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590337102,"sku":null,"price":2165.47,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Flat Bottom Link Mount With Hardware","offer_id":43230590369870,"sku":null,"price":2110.66,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590402638,"sku":null,"price":2348.27,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590435406,"sku":null,"price":2168.8,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Flat Bottom Link Mount With Hardware","offer_id":43230590468174,"sku":null,"price":2109.06,"currency_code":"USD","in_stock":true},{"title":"2007-2011 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590500942,"sku":null,"price":2347.02,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Dana 30 or Dana 44 Link Tower \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590533710,"sku":null,"price":1955.27,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Dana 30 or Dana 44 Link Tower \/ Flat Bottom Link Mount With Hardware","offer_id":43230590566478,"sku":null,"price":1893.26,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Dana 30 or Dana 44 Link Tower \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590599246,"sku":null,"price":2140.08,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Flat Bottom Link Mount With Hardware \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590632014,"sku":null,"price":1942.54,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Flat Bottom Link Mount With Hardware \/ Flat Bottom Link Mount With Hardware","offer_id":43230590664782,"sku":null,"price":1855.09,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Flat Bottom Link Mount With Hardware \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590697550,"sku":null,"price":2122.39,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590730318,"sku":null,"price":2220.0,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Flat Bottom Link Mount With Hardware","offer_id":43230590763086,"sku":null,"price":2165.19,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 2005-2022 Axle Truss Swap Kit For 3 Link Front Suspension \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590795854,"sku":null,"price":2403.15,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Dana 44 Rear Axle Truss And Upper Link Mount","offer_id":43230590828622,"sku":null,"price":2218.4,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Flat Bottom Link Mount With Hardware","offer_id":43230590861390,"sku":null,"price":2163.59,"currency_code":"USD","in_stock":true},{"title":"2012-2018 \/ Jeep JK Superduty Dana 60 1999-2004 Axle Truss Swap Kit For 3 Link Front Suspension \/ Jeep JK GM 14 Bolt One Ton Axle Truss Swap Kit 3 Link","offer_id":43230590894158,"sku":null,"price":2436.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_18_jk-3-link-suspension-system.jpg?v=1765654122"},{"product_id":"jeep-jk-superduty-dana-60-axle-truss-swap-kit-for-3-link-front-suspension-1","title":"Jeep JK Superduty Dana 60 Axle Truss Swap Kit For 3 Link Front Suspension","description":"\u003cdiv\u003eWe designed our Jeep JK Superduty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 1999-2004, or 2005-2022 Ford Superduty in the front of your 2007-2018 Jeep JKU or JK.  This kit is designed to work with a Dana 60 driver drop front axle out of a 1999-2004, or 2005-2022 Ford F-250 or F-350.  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss, set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a Dana 60 under your Jeep JK, welding is required.  This kit is designed to be used in conjunction with a custom 3 link front suspension, the upper link mount features a 2-5\/8 inch mounting width and a 9\/16 inch bolt hole.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eA 3 link front suspension is required to use this kit\u003c\/div\u003e\n\u003cdiv\u003eTrimming of the casting on the drivers side and the inner C's is required\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the Superduty Dana 60 is 8x170 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-1-ton-swap-offset-front-lower-control-arm-kit?_pos=1\u0026amp;_sid=054ac7c45\u0026amp;_ss=r\"\u003eCustom lower control arms\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand a custom track bar is required.  \u003c\/div\u003e\n\u003cdiv\u003eA new frame side track bar bracket is included.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft modifications, vent tube, and steering linkages are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_SD_60_Swap_Truss_Kit_3_Link_Upper_65359c5d-009d-442f-a0a1-9a7ccbec147e.pdf?v=1747932019\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"2005-2022","offer_id":43230595448910,"sku":null,"price":292.35,"currency_code":"USD","in_stock":true},{"title":"1999-2004","offer_id":43230595481678,"sku":null,"price":290.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_33_jk-super-duty-3-link-kit.jpg?v=1765654397"},{"product_id":"jeep-wrangler-jk-dana-44-truss-with-upper-3-link-mount-1","title":"Jeep Wrangler JK Dana 44 Truss With Upper 3 Link Mount","description":"\u003cp\u003e\u003cspan\u003eWe designed this rear axle truss with 3 link mount for the folks that are looking to take their 2007-2018 Jeep Wrangler JK or JKU to the next level with a custom, bind free 3 link suspension.  This axle truss is designed to strengthen your rear axle, while also giving you a location to mount an upper link for a 3 link rear suspension.  The upper link mount accepts a 2-5\/8 inch wide suspension joint with a 9\/16 inch bolt, three mounting locations are incorporated 1 inch apart so you can fine tune your anti-squat numbers to your exact needs.  Heavy duty 1\/4 inch and 3\/16 inch steel is used throughout the structure of this truss for strength and durability.  This kit will fit all Jeep Wrangler JK model Dana 44 rear axles.  This part will ship bare and requires welding and fabrication to install.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_and_JKU_Rear_3_Link_Axle_Truss_and_3_Link_Mount_Kit_Installation_Instructions.pdf?v=1652362298\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\" alt=\"\" border=\"0px\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43230597578830,"sku":null,"price":76.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_13_jeep-wrangler-jk-rear-axle-bridge-with-link-mount.jpg?v=1765654842"},{"product_id":"flat-bottom-link-mount-bracket-single","title":"Flat Bottom Link Mount Bracket Single","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eThese flat bottom link mounts are made to be welded directly to any flat surface. This is a super strong CNC bent, Laser cut bracket made to take serious abuse. Perfect for a three link or four link suspension system. These are made to be attached to any flat surface and have an inside width of 2 5\/8\" or 2\" for heims with misalignment spacers installed. Like all of our products, they are made in the USA from USA steel.  These brackets are sold individually. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"2-5\/8 Inch Mounting Width 9\/16 Inch Bolt Hole","offer_id":43230599479374,"sku":null,"price":12.09,"currency_code":"USD","in_stock":true},{"title":"2 Inch Mounting Width 1\/2 Inch Bolt Hole","offer_id":43230599512142,"sku":null,"price":11.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_48_flat-bottom-link-mount-single.jpg?v=1765655039"},{"product_id":"jeep-jk-3-link-suspension-frame-bracket-kit","title":"Jeep JK 3 Link Suspension Frame Bracket Kit","description":"\u003cp\u003eThis kit contains all of the heavy duty frame side brackets that you will need to convert your 2007-2018 Jeep Wrangler JK or JKU to a custom long arm 3 link front and rear suspension.  The brackets in this kit have been designed for easy installation using features on the factory frame (holes, slots, etc) to locate their correct position and be welded in place.  The crossmember will bolt directly in place of the factory cross member and provide locations for the front lower control arms to mount.  We have dedicated a large amount of time developing and fine tuning the suspension geometry in this kit to its optimal state.  When used as a complete kit with our axle brackets you can rest assured that you will have the correct suspension geometry, and performance characteristics to conquer any trail.  Factory axles, and 1 ton axles with our truss swap kits are compatible with this bracket kit.  Suspension links will be needed and additional axle brackets may be required for a complete installation of a 3 link on your vehicle.  All brackets will ship bare and need to be painted or powder coated after installation, welding is required for installation of this kit.  If using a factory front axle we recommend installing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/product.asp?itemid=381\"\u003ea truss\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto reinforce the upper control arm mount on the axle. \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIncluded in kit:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-3-link-transmission-crossmember-2007-2011\"\u003e07-11 Crossmember\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-3-link-transmission-crossmember-2012-2018\"\u003e12-18 Crossmember\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewith integrated lower control arm mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e1 \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-3-link-frame-front-upper-control-arm-mount\"\u003eFront upper control arm mounting bracket\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-3-link-rear-frame-upper-control-arm-mount\"\u003eRear upper control arm mounting bracket\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/barnes4wd.com\/products\/jeep-jk-3-link-rear-frame-lower-control-arm-mounts\"\u003eRear lower control arm mounting brackets\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll installation hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JK_3_Link_Frame_Bracket_Kit_Installation_Instructions.pdf?v=1652362157\"\u003e\u003cimg border=\"0px\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"2007-2011","offer_id":43230601117774,"sku":null,"price":388.22,"currency_code":"USD","in_stock":true},{"title":"2012-2018","offer_id":43230601150542,"sku":null,"price":442.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_12_jk-3-link-frame-bracket-kit.jpg?v=1765655187"}],"url":"https:\/\/www.precisionautooffroad.com\/collections\/jeep-jk-2007-2019.oembed","provider":"Precision Auto \u0026 Offroad","version":"1.0","type":"link"}