{"title":"Driveline Components","description":"","products":[{"product_id":"3-5-lift-kit-j-venture-wrangler-jk","title":"3.5\" Lift Kit | J-Venture | Wrangler JK","description":"\u003cdiv class=\"custom_overview\"\u003e\n\u003cdiv class=\"custom_overview_left\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cp\u003eIncrease your Jeep Wrangler JK 4-Door's ground clearance, tire clearance and performance with a J-Venture 3.5\" suspension system. This complete, bolt-on kit includes JSPEC custom-matched JSPEC dual-rate coil springs, custom-valved FOX Adventure Series monotube gas shocks, a front adjustable track bar, rear track bar bracket, front sway bar Quicker Disconnects, bump stop extensions, and caster plate alignment correction. J-Ventureâ„¢ provides improved ride quality on road. When the road ends, disconnect your sway bar end links for improved articulation. That makes J-Venture the perfect entry-level performance suspension system. FOX Adventure Series shocks enhance performance as compared to standard JSPEC shock absorbers. The system has been engineered for low maintenance. Get out and explore with J-Venture.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom_overview_right\"\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eFront+Rear Dual Rate Coil Springs designed to great ride and improved performance across any terrain.\u003c\/li\u003e\n\u003cli\u003eFront+Rear Gas Shocks (JSPEC or FOX 2.0 Adventure Series IFP) specifically valved for this suspension system for improved performance on and off-road.\u003c\/li\u003e\n\u003cli\u003eFront Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle.\u003c\/li\u003e\n\u003cli\u003eFront Sway Bar Quicker Disconnects and Brake Line Brackets to allow for increased offroad articulation.\u003c\/li\u003e\n\u003cli\u003eFront+Rear Bump Stop Extensions to properly limit suspension up travel.\u003c\/li\u003e\n\u003cli\u003eFront Caster Cam Locks to correct front end caster once lifted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"max_tire_panel\"\u003e\n\u003cp class=\"title\"\u003eRecommended Tires \u0026amp; Wheels\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 17 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 18 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 20 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp class=\"trimming_note\"\u003e(Trimming may be required)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"help_text_container\"\u003e\n\u003cdiv class=\"help_text_item\"\u003e\n\u003ch3\u003eRead our Shock Buyers\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JKS","offers":[{"title":"FOX 2.0 Adventure Series","offer_id":43215423504462,"sku":null,"price":1345.7,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Performance Series","offer_id":43215423537230,"sku":null,"price":1785.7,"currency_code":"USD","in_stock":true},{"title":"FOX 2.0 Remote Reservoir","offer_id":43215423569998,"sku":null,"price":2305.7,"currency_code":"USD","in_stock":true},{"title":"FOX 2.5 Performance Elite","offer_id":43215423602766,"sku":null,"price":4105.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_65_jks_jspec_100k_101k_102k_103k_jk_j_venture_card_90f8a691-29ed-44db-b73b-016e17ef6a4d.jpg?v=1765137980"},{"product_id":"05-22-super-duty-dana-60-8x6-5-drill-jig","title":"05-22 Super Duty Dana 60 8x6.5\" Drill Jig","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eIf you are looking to convert your 05-22 Super Duty Dana 60 axle to an 8x6.5\" lug pattern to match your 1 ton rear, we have you covered with our lug pattern drill jig.  We designed this drill jig with the end user in mind to insure ease of use and longevity.  Included with the jig is an industrial grade drill bushing to insure correct hole location, and the ability to use the jig several times to redrill multiple sets of bearings.  \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConvert your 05-22 Super Duty Dana 60 to 8x6.5\" lug pattern\u003c\/li\u003e\n\u003cli\u003eA hand drill can be used, but a drill press or milling machine is recommended\u003c\/li\u003e\n\u003cli\u003eA 19\/32\" and a 13\/16\" drill bit is required\u003c\/li\u003e\n\u003cli\u003eA shop press is required\u003c\/li\u003e\n\u003cli\u003eBrake rotor holes will also need to be drilled out to 13\/16\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/B4WK12672_SD_D60_Drill_Jig_0f2e308c-7094-48ed-acf1-17af793efe1d.pdf?v=1747927721\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43228129198158,"sku":null,"price":53.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_58_super-duty-dana-60-lug-pattern-jig_00deddbd-7450-4a97-af9e-527ab8d424bb.jpg?v=1769722466"},{"product_id":"jeep-tj-rear-axle-brackets-dana-60-and-ford-8-9","title":"Jeep TJ Rear Axle Brackets (Dana 60 and Ford 8.8)","description":"\u003cp\u003e\u003cspan\u003eBarnes 4wd is proud to offer our Jeep TJ rear axle bracket kit, this is for the do it yourself folks that want to swap the rear axle in their Jeep TJ or LJ.  This is a complete kit that comes with all the brackets needed to swap a different rear axle into your Jeep, all brackets are cut to fit a 3 1\/4\" axle tube (Dana 60 or Ford 8.8) but will fit other size tubes with minor modification. This kit is designed to maintain all factory mounting locations and is suitable to use with most aftermarket lift kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eContents of the kit include:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2 upper control arm mounts\u003c\/li\u003e\n\u003cli\u003e2 Sway bar brackets\u003c\/li\u003e\n\u003cli\u003e2 Coil spring bracket kits\u003c\/li\u003e\n\u003cli\u003e2 lower control arm mounts\u003c\/li\u003e\n\u003cli\u003e2 shock mounts\u003c\/li\u003e\n\u003cli\u003e1 track bar bracket\u003c\/li\u003e\n\u003cli\u003e6 3\/8\" Grade 8 Nuts \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43258780057678,"sku":null,"price":151.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/TJ-Rear-Axle-Bracket-Kit_-New_a79b839a-4129-4fd9-8792-1c8362e20648.jpg?v=1766603761"},{"product_id":"jeep-tj-lj-mj-xj-and-zj-front-axle-coil-spring-brackets","title":"Jeep TJ, LJ, MJ, XJ, and ZJ Front Axle Coil Spring Brackets","description":"\u003cp\u003e\u003cspan\u003eIf you are looking at replacing the front axle coil spring brackets on your TJ, LJ, MJ, XJ, or ZJ we have you covered. These brackets are exact duplicates of the factory brackets and have all of the associated mounting locations built in. This kit includes brackets for the passenger and driver side of your jeep and will accommodate the mounting of your coil springs, shocks, track bar, steering stabilizer, and sway bar ends. These brackets are just what you need to replace rusted out factory brackets, or with a little modification they can be used for an axle swap. The brackets are manufactured with a section that is cut to cradle the bottom coil of the spring, this tab will need to be bent down and welded into place upon installation. The brackets will ship bare and need to be assembled and welded to the axle during installation.  All components are manufactured from 3\/16\" steel, giving you a much stronger bracket than factory.\u003c\/span\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43258780287054,"sku":null,"price":105.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/tj-xj-front-coil-spring-brackets.jpg?v=1766603927"},{"product_id":"tj-rear-sway-bar-bolts","title":"TJ Rear Sway Bar Bolts","description":"\u003cdiv class=\"product__description rte\"\u003e\n\u003cp\u003eLooking to replace your hard to find shoulder bolt on your Jeeps TJ Rear Sway Bar? Barnes 4wd has the solution for you. We have designed a sleeve to go on a standard bolt M10 10.9 bolt to turn it into a shoulder bolt. This kit is sold in pairs and will ship with all class 10.9 hardware. Kit replaces Mopar part#\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e6503726. Replaces bolt pictured. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: \u003c\/p\u003e\n\u003cp\u003e1997-2006 Jeep Wrangler TJ Rear Sway Bar\u003c\/p\u003e\n\u003cp\u003e1999-2004 Jeep Grand Cherokee WJ Rear Sway Bar\u003c\/p\u003e\n\u003cp\u003e1997-2007 Dodge Dakota Rear Sway Bar\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43258807287886,"sku":null,"price":8.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/TJ-Rear-Swaybar-Bolt.webp?v=1766606422"},{"product_id":"1-inch-extended-bump-stop-pair-hd-polyurethane-for-tj-wrangler-zj-grand-cherokee-and-ram-trucks-1","title":"1 Inch Extended Bump Stop Pair HD Polyurethane for TJ Wrangler, ZJ Grand Cherokee, and Ram Trucks","description":"\u003cp\u003eBarnes 4wd is proud to introduce our 1 inch extended HD polyurethane bump stops, for TJ and LJ Wranglers, ZJ Grand Cherokee, and Ram trucks.  These bump stops are manufactured from high quality 60A durometer material for just the right amount of durability and softness to absorb those hard hits.  These are sold as pairs and are 1 inch taller than the stock bump stops.\u003c\/p\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003e1997-2006 TJ and LJ Wranglers (front and rear)\u003c\/p\u003e\n\u003cp\u003e1993-1998 ZJ Grand Cherokee (front)\u003c\/p\u003e\n\u003cp\u003e1999-2001 Ram 1500 Pickup (front)\u003c\/p\u003e\n\u003cp\u003e1994-2002 Ram 2500 Pickup (front)\u003c\/p\u003e\n\u003cp\u003e1994-2002 Ram 3500 Pickup (front)\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43258807713870,"sku":null,"price":41.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/TJ-Extended-Bumpstop-Pair_c5aa1d86-5847-4417-bebd-f96687af4d98.jpg?v=1766606584"},{"product_id":"tj-lj-mj-xj-wj-and-zj-passenger-axle-upper-control-arm-bracket-kit-1","title":"TJ, LJ, MJ, XJ, WJ, and ZJ Passenger Axle Upper Control Arm Bracket Kit","description":"\u003cdiv\u003eFitment Details:\u003c\/div\u003e\n\u003cdiv\u003e- Bracket will not work with other brand's press in joints\u003c\/div\u003e\n\u003cdiv\u003eThis bracket is the one you need if you are replacing your factory front axle upper control arm bracket on your Jeep TJ, LJ, MJ, XJ, WJ, or ZJ. The bracket is manufactured from 3\/16\" steel, and all the parts are included to perform a full replacement. Installation is easy, remove your old bracket and weld this one in its place. This bracket kit will work with Dana 44 or Dana 30 front axles.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43258965262414,"sku":null,"price":21.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/tj-lj-mj-xj-zj-front-axle-upper-mount_8a37d8ef-1cb1-457d-b783-b60daa978a3f.webp?v=1766617662"},{"product_id":"rj-151402-101-jt-gladiator-driveshaft-carrier-bearing-drop-kit-1","title":"RJ-151402-101 - JT Gladiator Driveshaft Carrier Bearing Drop Kit","description":"\u003cp\u003e\u003cb\u003eRockJock’s Driveshaft Carrier Bearing Drop Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor JT Gladiators is mandatory in lifted applications to reduce driveline angles.\u003cbr\u003eThis beautifully CNC machined 6061-T6 billet aluminum spacer installs very simply by unbolting the 2 driveshaft carrier bearing bolts from the bottom of the frame, dropping the bearing down, sliding this spacer in and then bolting the carrier bearing and spacer back up with the new, supplied, longer hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJT Gladiator – All Models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Billet Aluminum Spacer\u003c\/li\u003e\n\u003cli\u003eAll required hardware and step-by-step\u003cspan\u003e \u003c\/span\u003einstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eSpacer Specs.:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThickness  =  .740 in.\u003c\/li\u003e\n\u003cli\u003eLength  =  7.750 in.\u003c\/li\u003e\n\u003cli\u003eWidth  =  1.625 in.\u003c\/li\u003e\n\u003cli\u003eFinish  =  clear anodize.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum Spacer:  RJ-151402-1\u003c\/li\u003e\n\u003cli\u003e10mm-1.5 x 40mm Long Hex Bolt:  RJ-501101-1\u003c\/li\u003e\n\u003cli\u003e10mm Lock Washer:  CE-91202A242\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43275925454926,"sku":null,"price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/RJ-151402-101_webstoreimage.avif?v=1767229092"},{"product_id":"rj-131100-103-jk-front-geometry-correction-brackets-pair","title":"RJ-131100-103 - JK Front Geometry Correction Brackets (pair)","description":"\u003cp\u003e\u003cb\u003eRockJock's Front Suspension Geometry Correction Brackets\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor JK Wrangler and Unlimited models restores factory drivability and handling characteristics after installing a lift. These brackets will put the control arms back in stock position in relation to the axle, correcting caster angle, improving front driveline angle and causing the axle to travel in it's factory intended arc. General road manners and the way in which the vehicle absorbs bumps are restored to stock feel.\u003cbr\u003eThis kit is completely bolt-on and very simply installs into the factory control arm brackets on the vehicle frame. Additional holes are provided for correctly geometry in vehicles that are equipped with aftermarket, 1 ton axles.\u003cbr\u003eBrackets are finished in semi-gloss black and include all necessary hardware for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) - All Models\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) - All Models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRH and LH Geometry Correction Brackets\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLift\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- This kit is ideally designed to work on 2.5 in. - 3.5 in. lifted vehicles. It may also be used with larger lift amounts, but will yield diminished benefit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eControl Arms\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- May be used with factory or adjustable control arms such as our\u003cspan\u003e \u003c\/span\u003eCE-9807FUA\u003cspan\u003e \u003c\/span\u003eupper and\u003cspan\u003e \u003c\/span\u003eCE-9807FLA\u003cspan\u003e \u003c\/span\u003elower Control Arm Sets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeometry Correction Bracket (LH):  RJ-131100-101\u003c\/li\u003e\n\u003cli\u003eGeometry Correction Bracket (RH):  RJ-131100-102\u003c\/li\u003e\n\u003cli\u003eSteel Spacer (.875 in. OD x .650 ID x 2.641 in. Long):  RJ-514000-3\u003c\/li\u003e\n\u003cli\u003e14mm -1.5 x 100mm Long Hex Bolt:  RJ-501102-3\u003c\/li\u003e\n\u003cli\u003e14mm Flat Washer:  CE-90108A033\u003c\/li\u003e\n\u003cli\u003e14mm -1.5 Stover Lock Nut:  RJ-502102-1\u003c\/li\u003e\n\u003cli\u003e12mm -1.75 x 85mm Long Hex Bolt:  RJ-501104-1\u003c\/li\u003e\n\u003cli\u003e12mm Flat Washer:  CE-91455A150\u003c\/li\u003e\n\u003cli\u003e12mm -1.75 Stover Lock Nut:  RJ-502104-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43285835087950,"sku":null,"price":428.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/RJ-131100-103_webstoreimage-1.jpg?v=1767558460"},{"product_id":"ce-9807ftbk-jk-front-trac-bar-geometry-correction-bracket","title":"CE-9807FTBK - JK Front Trac Bar Geometry Correction Bracket","description":"\u003cp\u003e\u003cb\u003eRockJock's JK Front Trac Bar Geometry Correcting Axle Bracket\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003erelocates the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar mounting point on lifted vehicles.\u003cbr\u003eThis kit is bolts to the factory axle housing and then requires some minor welding.\u003cbr\u003eBracket is finished in semi-gloss black and includes all necessary hardware for installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) – All Models’ Stock Differentials\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) –All Models’ Stock Differentials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrac Bar Relocation Bracket (rearward component)\u003c\/li\u003e\n\u003cli\u003eTrac Bar Relocation Bracket (forward component)\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLift\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- This kit is ideally designed to work on 2.5 in. to 4 in. lifted vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlipped Drag Link\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- An additional Trac Bar mounting hole is provided for use in conjunction with a flipped orientation drag link.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTrac Bar\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- May be used with a factory trac bar (within the lift parameters above). Bracket may also be used with larger lift amounts, but will yield diminished benefit without the use of an adjustable trac bar, such as our\u003cspan\u003e \u003c\/span\u003eRJ-9120FJKF\u003cspan\u003e \u003c\/span\u003eJohnny Joint adjustable trac bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e- Requires minor welding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRearward Bracket:  CE-7120F-TB1\u003c\/li\u003e\n\u003cli\u003eForward Bracket:  CE-7120F-TB2\u003c\/li\u003e\n\u003cli\u003eSteel Spacer (1.125 in. OD x x .578 in. ID x 1.475 in. Long):  CE-9807FTBS1\u003c\/li\u003e\n\u003cli\u003eSteel Spacer (.750 in. OD x .390 in. ID x 1.440 in. Long):  CE-9807FTBS2\u003c\/li\u003e\n\u003cli\u003e9\/16 in.-18 x 3 1\/2 in. Long Hex Bolt:  RJ-511200-1\u003c\/li\u003e\n\u003cli\u003e9\/16 in. Flat Washer:  CE-H0022\u003c\/li\u003e\n\u003cli\u003e9\/16 in.-18 Stover Lock Nut:  CE-H0025\u003c\/li\u003e\n\u003cli\u003e3\/8 in.-24 x 1 in. Long Hex Bolt:  CE-92865A215\u003c\/li\u003e\n\u003cli\u003e3\/8 in.-24 x 3 in. Long Hex Bolt:  CE-91247A231\u003c\/li\u003e\n\u003cli\u003e3\/8 in. Flat Washer:  CE-90108A415\u003c\/li\u003e\n\u003cli\u003e3\/8 in.-24 Stover Lock Nut:  CE-92501A430\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43285871820878,"sku":null,"price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9807FTBK_webstoreimage-1.jpg?v=1767560214"},{"product_id":"ce-9102jk-jk-front-axle-housing-johnny-joint-kit","title":"CE-9102JK - JK Front Axle Housing Johnny Joint Kit","description":"\u003cp\u003e\u003cb\u003eRockJock's Johnny Joint Differential Housing Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ereplaces the rubber front differential housing upper control arm bushings on your JK Wrangler and Unlimited or WJ Grand Cherokee with Johnny Joint rod ends from RockJock, allowing you to get maximum articulation out of your front suspension! If you are using our Johnny Joint control arms, this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.\u003cbr\u003eThis kit includes a machined Johnny Joint insert for the driver’s side of the differential, a weld-in (see\u003cspan\u003e \u003c\/span\u003einstructions) tombstone bracket, equipped with a Johnny Joint, that installs on the passenger’s side of the differential, greasable bolts for both Joints and an installation tool.\u003cbr\u003eRockJock’s Johnny Joints are the original and most durable high-articulation urethane suspension joint on the market. Johnny Joints feature a smooth steel ball that pivots inside a proprietary urethane shell to provide over 30 degrees (per joint) of quiet, shock dampening articulation - without the excessive deflection found in soft rubber-based flex joints. Johnny Joints deliver a smooth, comfortable on-road ride with the ultimate in off-road capability. They are so trusted, that they are used by multiple commercial suspension companies, for both street and off-road suspension systems.\u003cspan\u003e \u003c\/span\u003eLearn more here.\u003cbr\u003eJoints are fully greasable via the zerk fitted bolts. Finish is clear zinc plating on the insert style Johnny Joint and raw, weldable steel on the tombstone bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Fits:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJK Wrangler Unlimited (4-door) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eJK Wrangler (2-door) – All Models’ Factory Differential\u003c\/li\u003e\n\u003cli\u003eWJ Grand Cherokee – All Models’ Factory Differential\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  Machined 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(1)   Laser cut tombstone bracket w\/ 2 in. Johnny Joint\u003c\/li\u003e\n\u003cli\u003e(2)  Greasable Bolt w\/ Hardware\u003c\/li\u003e\n\u003cli\u003e(1)  Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting and welding equipment is required for installation!\u003c\/li\u003e\n\u003cli\u003eJohnny Joints require non-synthetic, hi-moly lube grease such as our\u003cspan\u003e \u003c\/span\u003eCE-9013G\u003c\/li\u003e\n\u003cli\u003eApplicable Johnny Joint Assembly\/Disassembly Tool for these joints:  CE-9112T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eParts List:\u003c\/span\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-In Tombstone Bracket (no internals):  CE-9102JK1\u003c\/li\u003e\n\u003cli\u003eComplete (single) Machined Johnny Joint w\/ Greasable Bolt:  CE-9112M2\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Rebuild Kit:  CE-9112RK\u003c\/li\u003e\n\u003cli\u003eJohnny Joint Pivot Ball:  CE-91122D\u003c\/li\u003e\n\u003cli\u003eGreasable Bolt:  CE-91128\u003c\/li\u003e\n\u003cli\u003eZerk Fitting (on bolt heads):  CE-1103K21\u003c\/li\u003e\n\u003cli\u003eInstallation Tool for driver’s side joint:  CE-9102KT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"rockjock4x4","offers":[{"title":"Default Title","offer_id":43285944664142,"sku":null,"price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/CE-9102JK_webstoreimage.avif?v=1767563688"},{"product_id":"3-5-lift-kit-j-venture-diesel-392-wrangler-jl-4-door","title":"3.5\" Lift Kit | J-Venture | DIESEL\/392 | Wrangler JL 4-Door","description":"\u003cdiv class=\"custom_overview_left\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cp\u003eIncrease ground clearance and tire clearance on your Diesel 4 Door JL Wrangler's with a 3.5\" lift J-Venture suspension system. You get the perfect balance of on and off road capability plus low maintenance. J-Venture lift kits include dual rate front and rear coil springs, specifically-valved gas shocks, a front adjustable track bar, rear track bar bracket, front sway bar Quicker Disconnects, bump stop extensions, and front caster lock plates to dial in geometry. The engineers at JKS custom tune shocks and matching springs to significantly improve ride quality and handling on road, as well as performance off-road. An adjustable track bar helps center the front axle while the Quicker Disconnects improve articulation off-road. Get out and explore with J-Venture.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"custom_overview_right\"\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear dual rate coils springs\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 Performance IFP Shocks or FOX 2.5 Performance Elite Shocks\u003c\/li\u003e\n\u003cli\u003eJKS MFG front adjustable trackbar\u003c\/li\u003e\n\u003cli\u003eJKS MFG front sway bar quicker disconnects\u003c\/li\u003e\n\u003cli\u003eFront caster cam locks\u003c\/li\u003e\n\u003cli\u003eFront\/Rear bump stop extensions\u003c\/li\u003e\n\u003cli\u003eRear extended sway bar links\u003c\/li\u003e\n\u003cli\u003eRear track bar bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"max_tire_panel\"\u003e\n\u003cp class=\"title\"\u003eRecommended Tires \u0026amp; Wheels\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 17 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 18 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 17 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 18 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 20 x 9 and 5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JKS","offers":[{"title":"Default Title","offer_id":43288630919246,"sku":null,"price":1452.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_69_JL_Jventure_adv_01_3000x_ef28e999-b9c4-461d-acdb-01a788de26a0.jpg?v=1767642833"},{"product_id":"jl-rear-frame-lower-control-arm-skidplates","title":"JL Rear Frame Lower Control Arm Skidplates","description":"\u003cdiv\u003eIf your looking to add protection to your rear frame lower control arm mount on your Jeep Wrangler JL, then look no further. Our bolt on lower control arm skids will not only protect your lower control arm joints but add much needed reinforcement to your thin factory lower control arm brackets. Our skids are laser cut and CNC bent in house from American 1\/4\" Steel. Skid plates are sold in pairs and will ship bare steel with all grade 8 hardware. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eFitment:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e2018-2024 Jeep JL Wrangler (Except JL Wrangler 392)\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43300656808014,"sku":null,"price":58.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_3_Jeep-JL-Rear-Frame-Bolt-On-Lower-Control-Arm-Skid-Plate_1500x_15e713b6-3e2c-4ae7-a632-4121f9330981.jpg?v=1767987349"},{"product_id":"jeep-jl-jt-superduty-dana-60-axle-truss-swap-kit","title":"Jeep JL \u0026 JT Super Duty Dana 60 Axle Truss Swap Kit","description":"\u003cdiv\u003eWe designed our Jeep JL\/JT Super Duty Dana 60 swap kit to make it easy for you to put a Dana 60 from a 2005-2022 Ford Super Duty in the front of your 2018-Present Jeep JL or 2020-Present Jeep JT.  This kit is designed to work with a Dana 60 driver drop front axle out of a 2005-2022 Ford F-250 or F-350.  All parts of this kit are keyed to the truss, making installation a breeze.  Simply center the truss, set the angle, and all other components will locate off from the truss.  This kit includes all of the needed suspension brackets to install a Dana 60 under your Jeep JL or JT, welding is required.\u003c\/div\u003e\n\u003cdiv\u003eInstallation Notes:\u003c\/div\u003e\n\u003cdiv\u003eTrimming of the casting on the drivers side and the inner C's is required\u003c\/div\u003e\n\u003cdiv\u003eThe lug pattern on the Super Duty Dana 60 is 8x170 this will not match the factory lug pattern on your Jeep.\u003c\/div\u003e\n\u003cdiv\u003eCustom lower control arms and a custom track bar is required. \u003c\/div\u003e\n\u003cdiv\u003eA new frame side track bar bracket is included.\u003c\/div\u003e\n\u003cdiv\u003eBrake lines, driveshaft modifications, vent tube, and steering linkages are the responsibility of the end user.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/files\/Jeep_JL_Superduty_1_Ton_Dana_60_2005_Installation_Instructions.pdf?v=1652363110\"\u003e\u003cimg border=\"0px\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/3752\/5720\/t\/2\/assets\/Installation-Instructions-Icon.jpg?v=1642474180\"\u003e\u003c\/a\u003e\u003c\/div\u003e","brand":"Barnes 4WD","offers":[{"title":"Default Title","offer_id":43300969545806,"sku":"B4WK12510","price":326.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/8668\/7822\/files\/imgi_9_jeep-jl-super-duty-front-swap-kit_1445x_48666753-c4b2-48f7-b950-d84093171efa.jpg?v=1767992245"}],"url":"https:\/\/www.precisionautooffroad.com\/collections\/driveline-components.oembed","provider":"Precision Auto \u0026 Offroad","version":"1.0","type":"link"}